Re: [PATCH v2 0/9] Add SD host controller support for SC9860 platform

[Ulf Hansson]

On Tue, 4 Jun 2019 at 10:14, Baolin Wang <baolin.wang@xxxxxxxxxx> wrote:
>
> This patch set adds optional clock support, HS400 enhanced strobe mode support,
> PHY DLL configuration and other optimization to make the SD host controller
> can work well on the Spreadtrum SC9860 platform.
>
> Changes from v1:
>  - Add acked-tags from Adrian.
>  - Fix one mistake by changing MMC_TIMING_MMC_HS to MMC_TIMING_SD_HS in patch 8.
>
> Baolin Wang (9):
>   mmc: sdhci-sprd: Check the enable clock's return value correctly
>   dt-bindings: mmc: sprd: Add another optional clock documentation
>   mmc: sdhci-sprd: Add optional gate clock support
>   mmc: sdhci-sprd: Implement the get_max_timeout_count() interface
>   mmc: sdhci-sprd: Add HS400 enhanced strobe mode
>   mmc: sdhci-sprd: Enable PHY DLL to make clock stable
>   dt-bindings: mmc: sprd: Add PHY DLL delay documentation
>   mmc: sdhci-sprd: Add PHY DLL delay configuration
>   arm64: dts: sprd: Add Spreadtrum SD host controller support
>
>  .../devicetree/bindings/mmc/sdhci-sprd.txt         |   19 +++
>  arch/arm64/boot/dts/sprd/whale2.dtsi               |   35 ++++
>  drivers/mmc/host/sdhci-sprd.c                      |  171 +++++++++++++++++++-
>  3 files changed, 217 insertions(+), 8 deletions(-)
>
> --
> 1.7.9.5
>

Patch 1 -> patch 8, applied for next, thanks!

Patch 9 is for arm-soc.

Kind regards
Uffe