[PATCH v3 4/5] dt-bindings: drm/panel: simple: add ortustech,com37h3m99dtc panel

[H. Nikolaus Schaller]

Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
 .../display/panel/ortustech,com37h3m99dtc.txt        | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt

diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
new file mode 100644
index 000000000000..06a73c3f46b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
@@ -0,0 +1,12 @@
+OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
+
+Required properties:
+- compatible: should be "ortustech,com37h3m99dtc"
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: phandle of the regulator that provides the supply voltage
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
-- 
2.19.1