[PATCH v3 5/5] dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel

[H. Nikolaus Schaller]

Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
 .../bindings/display/panel/sharp,lq070y3dg3b.txt     | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt

diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt
new file mode 100644
index 000000000000..95534b55ee5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt
@@ -0,0 +1,12 @@
+Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq070y3dg3b"
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: phandle of the regulator that provides the supply voltage
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
-- 
2.19.1