Re: [PATCH V2 6/6] i2c: tegra: remove BUG, BUG_ON

[Dmitry Osipenko]

07.06.2019 22:30, Bitan Biswas ÐÐÑÐÑ:
> Remove redundant BUG_ON calls or replace with WARN_ON_ONCE
> as needed. Replace BUG() with error handling code.
> Define I2C_ERR_UNEXPECTED_STATUS for error handling.
> 
> Signed-off-by: Bitan Biswas <bbiswas@xxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-tegra.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 4dfb4c1..c89d0ee 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -73,6 +73,7 @@
>  #define I2C_ERR_NO_ACK				BIT(0)
>  #define I2C_ERR_ARBITRATION_LOST		BIT(1)
>  #define I2C_ERR_UNKNOWN_INTERRUPT		BIT(2)
> +#define I2C_ERR_UNEXPECTED_STATUS		BIT(3)
>  
>  #define PACKET_HEADER0_HEADER_SIZE_SHIFT	28
>  #define PACKET_HEADER0_PACKET_ID_SHIFT		16
> @@ -515,7 +516,6 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
>  	 * prevent overwriting past the end of buf
>  	 */
>  	if (rx_fifo_avail > 0 && buf_remaining > 0) {
> -		BUG_ON(buf_remaining > 3);
>  		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
>  		val = cpu_to_le32(val);
>  		memcpy(buf, &val, buf_remaining);
> @@ -523,7 +523,6 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
>  		rx_fifo_avail--;
>  	}
>  
> -	BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0);
>  	i2c_dev->msg_buf_remaining = buf_remaining;
>  	i2c_dev->msg_buf = buf;
>  
> @@ -581,7 +580,6 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
>  	 * boundary and fault.
>  	 */
>  	if (tx_fifo_avail > 0 && buf_remaining > 0) {
> -		BUG_ON(buf_remaining > 3);
>  		memcpy(&val, buf, buf_remaining);
>  		val = le32_to_cpu(val);
>  
> @@ -847,10 +845,13 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
>  
>  	if (!i2c_dev->is_curr_dma_xfer) {
>  		if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
> -			if (i2c_dev->msg_buf_remaining)
> +			if (i2c_dev->msg_buf_remaining) {
>  				tegra_i2c_empty_rx_fifo(i2c_dev);
> -			else
> -				BUG();
> +			} else {
> +				dev_err(i2c_dev->dev, "unexpected rx data request\n");
> +				i2c_dev->msg_err |= I2C_ERR_UNEXPECTED_STATUS;
> +				goto err;
> +			}
>  		}
>  
>  		if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
> @@ -876,7 +877,8 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
>  	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
>  		if (i2c_dev->is_curr_dma_xfer)
>  			i2c_dev->msg_buf_remaining = 0;
> -		BUG_ON(i2c_dev->msg_buf_remaining);
> +		if (WARN_ON_ONCE(i2c_dev->msg_buf_remaining))
> +			goto err;
>  		complete(&i2c_dev->msg_complete);
>  	}
>  	goto done;
> 

Unfortunately that's not enough because the indicator of the error is
the i2c_dev->msg_err and no error is set in yours case, hence no
hardware reset will be performed. It should be at least somewhat like this:

	if (WARN_ON_ONCE(i2c_dev->msg_buf_remaining)) {
		i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
		goto err;
	}