RE: [E1000-devel] [Intel-wired-lan] i40e X722 RSS problem with NAT-Traversal IPsec packets
From: Fujinaka, Todd
Date: Fri Jun 07 2019 - 18:12:51 EST
Just a quick update with the response I got and I'll make sure this is in our internal bug database.
Here's what I got back, and it looks like you guys have tried this already:
Have they tried these steps to configure RSS:
RSS Hash Flow
-------------
Allows you to set the hash bytes per flow type and any combination of one or
more options for Receive Side Scaling (RSS) hash byte configuration.
#ethtool -N <dev> rx-flow-hash <type> <option>
Where <type> is:
tcp4 signifying TCP over IPv4
udp4 signifying UDP over IPv4
tcp6 signifying TCP over IPv6
udp6 signifying UDP over IPv6
And <option> is one or more of:
s Hash on the IP source address of the rx packet.
d Hash on the IP destination address of the rx packet.
f Hash on bytes 0 and 1 of the Layer 4 header of the rx packet.
n Hash on bytes 2 and 3 of the Layer 4 header of the rx packet.
Also, looks like the driver needs to be updated to latest version:
>>> 1.1767.0 i40e 0000:3d:00.0: The driver for the device detected a
>>> newer version of the NVM image than expected. Please install the
>>> most recent version of the network driver.
Out of tree: https://sourceforge.net/projects/e1000/files/i40e%20stable/
Todd Fujinaka
Software Application Engineer
Datacenter Engineering Group
Intel Corporation
todd.fujinaka@xxxxxxxxx
-----Original Message-----
From: Hisashi T Fujinaka [mailto:htodd@xxxxxxxxxxxx]
Sent: Friday, June 7, 2019 1:50 PM
To: Alexander Duyck <alexander.duyck@xxxxxxxxx>
Cc: e1000-devel@xxxxxxxxxxxxxxxxxxxxx; Netdev <netdev@xxxxxxxxxxxxxxx>; intel-wired-lan <intel-wired-lan@xxxxxxxxxxxxxxxx>; LKML <linux-kernel@xxxxxxxxxxxxxxx>; Lennart Sorensen <lsorense@xxxxxxxxxxxxxxxxxxx>
Subject: Re: [E1000-devel] [Intel-wired-lan] i40e X722 RSS problem with NAT-Traversal IPsec packets
On Fri, 7 Jun 2019, Alexander Duyck wrote:
> On Fri, Jun 7, 2019 at 7:39 AM Lennart Sorensen
> <lsorense@xxxxxxxxxxxxxxxxxxx> wrote:
>>
>> On Wed, May 22, 2019 at 10:39:56AM -0400, Lennart Sorensen wrote:
>>> OK I applied those two patches and get this:
>>>
>>> i40e: Intel(R) Ethernet Connection XL710 Network Driver - version
>>> 2.1.7-k
>>> i40e: Copyright (c) 2013 - 2014 Intel Corporation.
>>> i40e 0000:3d:00.0: fw 3.10.52896 api 1.6 nvm 4.00 0x80001577
>>> 1.1767.0 i40e 0000:3d:00.0: The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.
>>> i40e 0000:3d:00.0: MAC address: a4:bf:01:4e:0c:87 i40e 0000:3d:00.0:
>>> PFQF_HREGION[7]: 0x00000000 i40e 0000:3d:00.0: PFQF_HREGION[6]:
>>> 0x00000000 i40e 0000:3d:00.0: PFQF_HREGION[5]: 0x00000000 i40e
>>> 0000:3d:00.0: PFQF_HREGION[4]: 0x00000000 i40e 0000:3d:00.0:
>>> PFQF_HREGION[3]: 0x00000000 i40e 0000:3d:00.0: PFQF_HREGION[2]:
>>> 0x00000000 i40e 0000:3d:00.0: PFQF_HREGION[1]: 0x00000000 i40e
>>> 0000:3d:00.0: PFQF_HREGION[0]: 0x00000000 i40e 0000:3d:00.0:
>>> flow_type: 63 input_mask:0x0000000000004000 i40e 0000:3d:00.0:
>>> flow_type: 46 input_mask:0x0007fff800000000 i40e 0000:3d:00.0:
>>> flow_type: 45 input_mask:0x0007fff800000000 i40e 0000:3d:00.0:
>>> flow_type: 44 input_mask:0x0007ffff80000000 i40e 0000:3d:00.0:
>>> flow_type: 43 input_mask:0x0007fffe00000000 i40e 0000:3d:00.0:
>>> flow_type: 42 input_mask:0x0007fffe00000000 i40e 0000:3d:00.0:
>>> flow_type: 41 input_mask:0x0007fffe00000000 i40e 0000:3d:00.0:
>>> flow_type: 40 input_mask:0x0007fffe00000000 i40e 0000:3d:00.0:
>>> flow_type: 39 input_mask:0x0007fffe00000000 i40e 0000:3d:00.0:
>>> flow_type: 36 input_mask:0x0006060000000000 i40e 0000:3d:00.0:
>>> flow_type: 35 input_mask:0x0006060000000000 i40e 0000:3d:00.0:
>>> flow_type: 34 input_mask:0x0006060780000000 i40e 0000:3d:00.0:
>>> flow_type: 33 input_mask:0x0006060600000000 i40e 0000:3d:00.0:
>>> flow_type: 32 input_mask:0x0006060600000000 i40e 0000:3d:00.0:
>>> flow_type: 31 input_mask:0x0006060600000000 i40e 0000:3d:00.0:
>>> flow_type: 30 input_mask:0x0006060600000000 i40e 0000:3d:00.0:
>>> flow_type: 29 input_mask:0x0006060600000000 i40e 0000:3d:00.0:
>>> flow_type: 27 input_mask:0x00000000002c0000 i40e 0000:3d:00.0:
>>> flow_type: 26 input_mask:0x00000000002c0000 i40e 0000:3d:00.0: flow
>>> type: 36 update input mask from:0x0006060000000000,
>>> to:0x0001801800000000 i40e 0000:3d:00.0: flow type: 35 update input
>>> mask from:0x0006060000000000, to:0x0001801800000000 i40e
>>> 0000:3d:00.0: flow type: 34 update input mask
>>> from:0x0006060780000000, to:0x0001801f80000000 i40e 0000:3d:00.0:
>>> flow type: 33 update input mask from:0x0006060600000000,
>>> to:0x0001801e00000000 i40e 0000:3d:00.0: flow type: 32 update input
>>> mask from:0x0006060600000000, to:0x0001801e00000000 i40e
>>> 0000:3d:00.0: flow type: 31 update input mask
>>> from:0x0006060600000000, to:0x0001801e00000000 i40e 0000:3d:00.0:
>>> flow type: 30 update input mask from:0x0006060600000000,
>>> to:0x0001801e00000000 i40e 0000:3d:00.0: flow type: 29 update input
>>> mask from:0x0006060600000000, to:0x0001801e00000000
>>>
>>> So seems the regions are all 0.
>>>
>>> All ipsec packets still hitting queue 0.
>>
>> So any news or more ideas to try or are we stuck hoping someone can
>> fix the firmware?
>
> I had reached out to some folks over in the networking division hoping
> that they can get a reproduction as I don't have the hardware that you
> are seeing the issue on so I have no way to reproduce it.
>
> Maybe someone from that group can reply and tell us where they are on that?
>
> Thanks.
>
> - Alex
For some reason this isn't showing up in my work email. We had an internal conference this week and I think people are away. I'll see if I can chase some people down if they're still here and not on the way home.
--
Hisashi T Fujinaka - htodd@xxxxxxxxxxxx
_______________________________________________
E1000-devel mailing list
E1000-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired