Re: [PATCH 4/5] drm/connector: Split out orientation quirk detection

From: Jani Nikula
Date: Tue Jun 11 2019 - 04:09:37 EST


On Mon, 10 Jun 2019, Derek Basehore <dbasehore@xxxxxxxxxxxx> wrote:
> This removes the orientation quirk detection from the code to add
> an orientation property to a panel. This is used only for legacy x86
> systems, yet we'd like to start using this on devicetree systems where
> quirk detection like this is not needed.

Not needed, but no harm done either, right?

I guess I'll defer judgement on this to Hans and Ville (Cc'd).

Side note, I'm about to apply some (minor) conflicting changes in our
-next as soon as I get CI results on it.


BR,
Jani.


>
> Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/drm_connector.c | 16 ++++------------
> drivers/gpu/drm/i915/intel_dp.c | 14 +++++++++++---
> drivers/gpu/drm/i915/vlv_dsi.c | 14 ++++++++++----
> include/drm/drm_connector.h | 2 +-
> 4 files changed, 26 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index e17586aaa80f..58a09b65028b 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1894,31 +1894,23 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
> * drm_connector_init_panel_orientation_property -
> * initialize the connecters panel_orientation property
> * @connector: connector for which to init the panel-orientation property.
> - * @width: width in pixels of the panel, used for panel quirk detection
> - * @height: height in pixels of the panel, used for panel quirk detection
> *
> * This function should only be called for built-in panels, after setting
> * connector->display_info.panel_orientation first (if known).
> *
> - * This function will check for platform specific (e.g. DMI based) quirks
> - * overriding display_info.panel_orientation first, then if panel_orientation
> - * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
> - * "panel orientation" property to the connector.
> + * This function will check if the panel_orientation is not
> + * DRM_MODE_PANEL_ORIENTATION_UNKNOWN. If not, it will attach the "panel
> + * orientation" property to the connector.
> *
> * Returns:
> * Zero on success, negative errno on failure.
> */
> int drm_connector_init_panel_orientation_property(
> - struct drm_connector *connector, int width, int height)
> + struct drm_connector *connector)
> {
> struct drm_device *dev = connector->dev;
> struct drm_display_info *info = &connector->display_info;
> struct drm_property *prop;
> - int orientation_quirk;
> -
> - orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> - if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> - info->panel_orientation = orientation_quirk;
>
> if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> return 0;
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index b099a9dc28fd..72ab090ea97a 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -40,6 +40,7 @@
> #include <drm/drm_edid.h>
> #include <drm/drm_hdcp.h>
> #include <drm/drm_probe_helper.h>
> +#include <drm/drm_utils.h>
> #include <drm/i915_drm.h>
>
> #include "i915_debugfs.h"
> @@ -7281,9 +7282,16 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> intel_connector->panel.backlight.power = intel_edp_backlight_power;
> intel_panel_setup_backlight(connector, pipe);
>
> - if (fixed_mode)
> - drm_connector_init_panel_orientation_property(
> - connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
> + if (fixed_mode) {
> + int orientation = drm_get_panel_orientation_quirk(
> + fixed_mode->hdisplay, fixed_mode->vdisplay);
> +
> + if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + connector->display_info.panel_orientation =
> + orientation;
> +
> + drm_connector_init_panel_orientation_property(connector);
> + }
>
> return true;
>
> diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> index bfe2891eac37..27f86a787f60 100644
> --- a/drivers/gpu/drm/i915/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> @@ -30,6 +30,7 @@
> #include <drm/drm_crtc.h>
> #include <drm/drm_edid.h>
> #include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_utils.h>
>
> #include "i915_drv.h"
> #include "intel_atomic.h"
> @@ -1650,6 +1651,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
>
> if (connector->panel.fixed_mode) {
> u32 allowed_scalers;
> + int orientation;
>
> allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) | BIT(DRM_MODE_SCALE_FULLSCREEN);
> if (!HAS_GMCH(dev_priv))
> @@ -1660,12 +1662,16 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> - connector->base.display_info.panel_orientation =
> - vlv_dsi_get_panel_orientation(connector);
> - drm_connector_init_panel_orientation_property(
> - &connector->base,
> + orientation = drm_get_panel_orientation_quirk(
> connector->panel.fixed_mode->hdisplay,
> connector->panel.fixed_mode->vdisplay);
> + if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + connector->base.display_info.panel_orientation = orientation;
> + else
> + connector->base.display_info.panel_orientation =
> + vlv_dsi_get_panel_orientation(connector);
> +
> + drm_connector_init_panel_orientation_property(&connector->base);
> }
> }
>
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 47e749b74e5f..c2992f7a0dd5 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1370,7 +1370,7 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
> void drm_connector_set_vrr_capable_property(
> struct drm_connector *connector, bool capable);
> int drm_connector_init_panel_orientation_property(
> - struct drm_connector *connector, int width, int height);
> + struct drm_connector *connector);
> int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
> int min, int max);

--
Jani Nikula, Intel Open Source Graphics Center