[PATCH v1 3/3] dt-bindings: iio: afe: Add hwmon example

[MylÃne Josserand]

With the support of CHAN_INFO_PROCESSED in voltage-divider,
it is possible to read the processed values directly from iio's
sysfs entries or by using iio-hwmon. Add an example for this last
use case.

Signed-off-by: MylÃne Josserand <mylene.josserand@xxxxxxxxxxx>
---
 .../bindings/iio/afe/voltage-divider.txt           | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
index b452a8406107..f7e1c7cb2744 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
@@ -51,3 +51,27 @@ sysv {
 		spi-max-frequency = <1000000>;
 	};
 };
+
+It is also possible to retrieve the processed values using hwmon node:
+
+div0: div0 {
+	compatible = "voltage-divider";
+	io-channels = <&adc0 0>; /* Channel 0 of the ADC */
+	output-ohms = <47>; /* R2 */
+	full-ohms = <73>; /* R1 (26) + R2 (47) */
+	#io-channel-cells = <1>;
+};
+
+div1: div1 {
+	compatible = "voltage-divider";
+	io-channels = <&adc0 1>; /* Channel 1 of the ADC */
+	output-ohms = <47>; /* R2 */
+	full-ohms = <115>; /* R1 (68) + R2 (47) */
+	#io-channel-cells = <1>;
+};
+
+iio-hwmon {
+	compatible = "iio-hwmon";
+	io-channels = <&div0 0>, <&div1 0>;
+	io-channel-names = "3v3", "usb";
+};
-- 
2.11.0