Re: [PATCH 1/1] ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1

[Shawn Guo]

On Thu, Jun 06, 2019 at 12:06:12PM +0300, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk@xxxxxxxxxxx>
> 
> Allows to use the SD interface at a higher speed mode if the card
> supports it. For this the signaling voltage is switched from 3.3V to
> 1.8V under the usdhc1's drivers control.
> 
> Signed-off-by: Igor Opaniuk <igor.opaniuk@xxxxxxxxxxx>

Applied, thanks.