Re: [PATCH v2 1/2] arm64: tegra: add ACONNECT, ADMA and AGIC nodes
From: Sameer Pujar
Date: Wed Jun 12 2019 - 09:04:02 EST
On 6/12/2019 6:06 PM, Jon Hunter wrote:
On 11/06/2019 09:56, Sameer Pujar wrote:
Add DT nodes for following devices on Tegra186 and Tegra194
* ACONNECT
* ADMA
* AGIC
Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 68 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 68 ++++++++++++++++++++++++++++++++
2 files changed, 136 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 426ac0b..ccd902b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1295,4 +1295,72 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
+
+ aconnect@2a41000 {
+ compatible = "nvidia,tegra210-aconnect";
+ clocks = <&bpmp TEGRA186_CLK_APE>,
+ <&bpmp TEGRA186_CLK_APB2APE>;
+ clock-names = "ape", "apb2ape";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x02930000 0x0 0x02930000 0x50000
+ 0x02a41000 0x0 0x02a41000 0x3000>;
We only need one address range here that covers the entire APE.
will update.
+ status = "disabled";
+
+ dma-controller@2930000 {
+ compatible = "nvidia,tegra186-adma";
+ reg = <0x02930000 0x50000>;
+ interrupt-parent = <&agic>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&bpmp TEGRA186_CLK_AHUB>;
+ clock-names = "d_audio";
+ status = "disabled";
+ };
+
+ agic: agic@2a41000 {
+ compatible = "nvidia,tegra210-agic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x02a41000 0x1000>,
+ <0x02a41000 0x2000>;
These addresses should not overlap.
typo! will fix, Thanks.
Cheers
Jon