[PATCH] drm: dw-hdmi-i2s: support more i2s format

From: Jerome Brunet
Date: Thu Jun 13 2019 - 11:29:34 EST


The dw-hdmi-i2s supports more formats than just regular i2s.
Add support for left justified, right justified and dsp modes
A and B.

Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---

Tested on the Amlogic arm64 meson-g12a-sei510 with i2s, left_j, dsp_a
and dsp_b. right_j is not supported by this platform.

.../drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 26 ++++++++++++++++---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 6 +++--
2 files changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 5cbb71a866d5..2b624cff541d 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -44,9 +44,8 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
u8 inputclkfs = 0;

/* it cares I2S only */
- if ((fmt->fmt != HDMI_I2S) ||
- (fmt->bit_clk_master | fmt->frame_clk_master)) {
- dev_err(dev, "unsupported format/settings\n");
+ if (fmt->bit_clk_master | fmt->frame_clk_master) {
+ dev_err(dev, "unsupported clock settings\n");
return -EINVAL;
}

@@ -63,6 +62,27 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
break;
}

+ switch (fmt->fmt) {
+ case HDMI_I2S:
+ conf1 |= HDMI_AUD_CONF1_MODE_I2S;
+ break;
+ case HDMI_RIGHT_J:
+ conf1 |= HDMI_AUD_CONF1_MODE_RIGHT_J;
+ break;
+ case HDMI_LEFT_J:
+ conf1 |= HDMI_AUD_CONF1_MODE_LEFT_J;
+ break;
+ case HDMI_DSP_A:
+ conf1 |= HDMI_AUD_CONF1_MODE_BURST_1;
+ break;
+ case HDMI_DSP_B:
+ conf1 |= HDMI_AUD_CONF1_MODE_BURST_2;
+ break;
+ default:
+ dev_err(dev, "unsupported format\n");
+ return -EINVAL;
+ }
+
dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate);

hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS);
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index 4e3ec09d3ca4..091d7c28aa17 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -869,8 +869,10 @@ enum {

/* AUD_CONF1 field values */
HDMI_AUD_CONF1_MODE_I2S = 0x00,
- HDMI_AUD_CONF1_MODE_RIGHT_J = 0x02,
- HDMI_AUD_CONF1_MODE_LEFT_J = 0x04,
+ HDMI_AUD_CONF1_MODE_RIGHT_J = 0x20,
+ HDMI_AUD_CONF1_MODE_LEFT_J = 0x40,
+ HDMI_AUD_CONF1_MODE_BURST_1 = 0x60,
+ HDMI_AUD_CONF1_MODE_BURST_2 = 0x80,
HDMI_AUD_CONF1_WIDTH_16 = 0x10,
HDMI_AUD_CONF1_WIDTH_24 = 0x18,

--
2.20.1