Re: [PATCHv3 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Shawn Guo]

On Thu, Jun 06, 2019 at 06:47:02PM +0200, Oliver Graute wrote:
> This patch adds DeviceTree Bindings for the i.MX6 UltraLite DART NAND/WIFI

It's device tree source, not bindings.

> 
> Signed-off-by: Oliver Graute <oliver.graute@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile                      |   1 +
>  arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 209 ++++++++++++++++++++++++
>  2 files changed, 210 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5559028..7f03ab5 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-tx6ul-0010.dtb \
>  	imx6ul-tx6ul-0011.dtb \
>  	imx6ul-tx6ul-mainboard.dtb \
> +	imx6ul-var-6ulcustomboard.dtb \
>  	imx6ull-14x14-evk.dtb \
>  	imx6ull-colibri-eval-v3.dtb \
>  	imx6ull-colibri-wifi-eval-v3.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> new file mode 100644
> index 0000000..80b860a
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: (GPL-2.0)
> +/*
> + * Support for Variscite DART-6UL Module
> + *
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com
> + * Copyright (C) 2018-2019 Oliver Graute <oliver.graute@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx6ul-imx6ull-var-dart-common.dtsi"
> +
> +/ {
> +	model = "Variscite i.MX6 UltraLite Carrier-board";
> +	compatible = "fsl,6ulcustomboard", "fsl,imx6ul";

The compatible should be documented.

> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 20000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +		status = "okay";

Unnecessary 'status'.

> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		user {
> +			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_BACK>;
> +			gpio-key,wakeup;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		d16_led {

We prefer to use hyphen than underscore in node name.

> +			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "wm8731audio";
> +		simple-audio-card,widgets =
> +			"Headphone", "Headphone Jack",
> +			"Line", "Line Jack",
> +			"Microphone", "Mic Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "RHPOUT",
> +			"Headphone Jack", "LHPOUT",
> +			"LLINEIN", "Line Jack",
> +			"RLINEIN", "Line Jack",
> +			"MICIN", "Mic Bias",
> +			"Mic Bias", "Mic Jack";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,bitclock-master = <&sound_master>;
> +		simple-audio-card,frame-master = <&sound_master>;
> +
> +		sound_master: simple-audio-card,cpu {
> +				sound-dai = <&sai2>;
> +		};
> +	};
> +};
> +
> +&can1 {
> +	status = "okay";
> +};
> +
> +&can2 {
> +	status = "okay";
> +};
> +
> +&gpc {
> +	fsl,cpu_pupscr_sw2iso = <0x2>;
> +	fsl,cpu_pupscr_sw = <0x1>;
> +	fsl,cpu_pdnscr_iso2sw = <0x1>;
> +	fsl,cpu_pdnscr_iso = <0x1>;
> +	fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */

All these are bindings from vendor tree?

> +};
> +
> +&fec1 {
> +	status = "okay";

We prefer to put 'status' at the end of property list.

> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> +	phy-handle = <&ethphy0>;
> +};
> +
> +&fec2 {
> +	status = "okay";
> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> +	phy-handle = <&ethphy1>;
> +};
> +
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock_frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	wm8731: codec@1a {

audio-codec for node name.

> +		#sound-dai-cells = <0>;
> +		compatible = "wlf,wm8731";
> +		reg = <0x1a>;
> +		clocks = <&clks IMX6UL_CLK_SAI2>;
> +		clock-names = "mclk";
> +	};
> +
> +	touchscreen@38 {
> +		compatible = "edt,edt-ft5x06";
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <4 0>;
> +		touchscreen-size-x = <800>;
> +		touchscreen-size-y = <480>;
> +		touchscreen-inverted-x;
> +		touchscreen-inverted-y;
> +	};
> +
> +	rtc@68 {
> +		compatible = "dallas,ds1337";
> +		reg = <0x68>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_rtc>;
> +		interrupt-parent = <&gpio5>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> +	};
> +};
> +
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif_dat
> +		     &pinctrl_lcdif_ctrl>;
> +	display = <&display0>;
> +	status = "okay";
> +
> +	display0: display {

Have a look at:

https://www.spinics.net/lists/arm-kernel/msg727550.html

Also, can we use new bindings documented in bindings/display/mxsfb.txt?

> +		bits-per-pixel = <16>;
> +		bus-width = <24>;
> +
> +		display-timings {
> +			native-mode = <&timing0>;
> +			timing0: timing0 {
> +				clock-frequency =<35000000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hfront-porch = <40>;
> +				hback-porch = <40>;
> +				hsync-len = <48>;
> +				vback-porch = <29>;
> +				vfront-porch = <13>;
> +				vsync-len = <3>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +	};
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog_1>;

Isn't imx6ul-imx6ull-var-dart-common.dtsi already having these them?

> +	imx6ul-evk {
> +

This container node shouldn't be needed.

Shawn

> +		pinctrl_rtc: rtcgrp {
> +			fsl,pins = <
> +				MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
> +			>;
> +		};
> +	};
> +};
> -- 
> 2.7.4
>