[PATCH] gsmi: replace printk with relevant dev_<level>
From: Saiyam Doshi
Date: Thu Jun 13 2019 - 15:02:07 EST
Replace printk() with dev_* macros for logging consistency.
In process of replacing printk with dev_err, dev_info etc.,
removed unnecessary "out of memory" debug message.
This also fixes checkpatch.pl warnings.
Signed-off-by: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
---
drivers/firmware/google/gsmi.c | 68 ++++++++++++++++++----------------
1 file changed, 37 insertions(+), 31 deletions(-)
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index edaa4e5d84ad..db11fc896c42 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -151,7 +151,6 @@ static struct gsmi_buf *gsmi_buf_alloc(void)
smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
if (!smibuf) {
- printk(KERN_ERR "gsmi: out of memory\n");
return NULL;
}
@@ -159,7 +158,7 @@ static struct gsmi_buf *gsmi_buf_alloc(void)
smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
&smibuf->handle);
if (!smibuf->start) {
- printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+ dev_err(&gsmi_dev.pdev->dev, "failed to allocate name buffer\n");
kfree(smibuf);
return NULL;
}
@@ -257,34 +256,40 @@ static int gsmi_exec(u8 func, u8 sub)
rc = 1;
break;
case GSMI_INVALID_PARAMETER:
- printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Invalid parameter\n", cmd);
rc = -EINVAL;
break;
case GSMI_BUFFER_TOO_SMALL:
- printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Buffer too small\n", cmd);
rc = -ENOMEM;
break;
case GSMI_UNSUPPORTED:
case GSMI_UNSUPPORTED2:
if (sub != GSMI_CMD_HANDSHAKE_TYPE)
- printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
- cmd);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Not supported\n", cmd);
rc = -ENOSYS;
break;
case GSMI_NOT_READY:
- printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Not ready\n", cmd);
rc = -EBUSY;
break;
case GSMI_DEVICE_ERROR:
- printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Device error\n", cmd);
rc = -EFAULT;
break;
case GSMI_NOT_FOUND:
- printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Data not found\n", cmd);
rc = -ENOENT;
break;
case GSMI_LOG_FULL:
- printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Log full\n", cmd);
rc = -ENOSPC;
break;
case GSMI_HANDSHAKE_CF:
@@ -293,8 +298,8 @@ static int gsmi_exec(u8 func, u8 sub)
rc = result;
break;
default:
- printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
- cmd, result);
+ dev_err(&gsmi_dev.pdev->dev,
+ "exec 0x%04x: Unknown error 0x%04x\n", cmd, result);
rc = -ENXIO;
}
@@ -341,7 +346,7 @@ static efi_status_t gsmi_get_variable(efi_char16_t *name,
rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
if (rc < 0) {
- printk(KERN_ERR "gsmi: Get Variable failed\n");
+ dev_err(&gsmi_dev.pdev->dev, "Get Variable failed\n");
ret = EFI_LOAD_ERROR;
} else if (rc == 1) {
/* variable was not found */
@@ -403,7 +408,7 @@ static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
if (rc < 0) {
- printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
+ dev_err(&gsmi_dev.pdev->dev, "Get Next Variable Name failed\n");
ret = EFI_LOAD_ERROR;
} else if (rc == 1) {
/* variable not found -- end of list */
@@ -467,7 +472,7 @@ static efi_status_t gsmi_set_variable(efi_char16_t *name,
rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
if (rc < 0) {
- printk(KERN_ERR "gsmi: Set Variable failed\n");
+ dev_err(&gsmi_dev.pdev->dev, "Set Variable failed\n");
ret = EFI_INVALID_PARAMETER;
}
@@ -517,7 +522,7 @@ static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
if (rc < 0)
- printk(KERN_ERR "gsmi: Set Event Log failed\n");
+ dev_err(&gsmi_dev.pdev->dev, "Set Event Log failed\n");
spin_unlock_irqrestore(&gsmi_dev.lock, flags);
@@ -645,10 +650,10 @@ static int gsmi_shutdown_reason(int reason)
spin_unlock_irqrestore(&gsmi_dev.lock, flags);
if (rc < 0)
- printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
+ dev_err(&gsmi_dev.pdev->dev, "Log Shutdown Reason failed\n");
else
- printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
- reason);
+ dev_emerg(&gsmi_dev.pdev->dev, "Log Shutdown Reason 0x%02x\n",
+ reason);
return rc;
}
@@ -759,7 +764,7 @@ static __init int gsmi_system_valid(void)
* whitewash our board names out of the public driver.
*/
if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
- printk(KERN_INFO "gsmi: Board is too old\n");
+ dev_info(&gsmi_dev.pdev->dev, "Board is too old\n");
return -ENODEV;
}
@@ -879,7 +884,7 @@ static __init int gsmi_init(void)
#ifdef CONFIG_PM
ret = platform_driver_register(&gsmi_driver_info);
if (unlikely(ret)) {
- printk(KERN_ERR "gsmi: unable to register platform driver\n");
+ dev_err(&gsmi_dev.pdev->dev, "unable to register platform driver\n");
return ret;
}
#endif
@@ -887,7 +892,7 @@ static __init int gsmi_init(void)
/* register device */
gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info);
if (IS_ERR(gsmi_dev.pdev)) {
- printk(KERN_ERR "gsmi: unable to register platform device\n");
+ dev_err(&gsmi_dev.pdev->dev, "unable to register platform device\n");
return PTR_ERR(gsmi_dev.pdev);
}
@@ -906,19 +911,19 @@ static __init int gsmi_init(void)
*/
gsmi_dev.name_buf = gsmi_buf_alloc();
if (!gsmi_dev.name_buf) {
- printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+ dev_err(&gsmi_dev.pdev->dev, "failed to allocate name buffer\n");
goto out_err;
}
gsmi_dev.data_buf = gsmi_buf_alloc();
if (!gsmi_dev.data_buf) {
- printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
+ dev_err(&gsmi_dev.pdev->dev, "failed to allocate data buffer\n");
goto out_err;
}
gsmi_dev.param_buf = gsmi_buf_alloc();
if (!gsmi_dev.param_buf) {
- printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
+ dev_err(&gsmi_dev.pdev->dev, "failed to allocate param buffer\n");
goto out_err;
}
@@ -960,7 +965,7 @@ static __init int gsmi_init(void)
/* Remove and clean up gsmi if the handshake could not complete. */
if (gsmi_dev.handshake_type == -ENXIO) {
- printk(KERN_INFO "gsmi version " DRIVER_VERSION
+ dev_info(&gsmi_dev.pdev->dev, "gsmi version " DRIVER_VERSION
" failed to load\n");
ret = -ENODEV;
goto out_err;
@@ -970,28 +975,28 @@ static __init int gsmi_init(void)
ret = -ENOMEM;
gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
if (!gsmi_kobj) {
- printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
+ dev_info(&gsmi_dev.pdev->dev, "Failed to create firmware kobj\n");
goto out_err;
}
/* Setup eventlog access */
ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
if (ret) {
- printk(KERN_INFO "gsmi: Failed to setup eventlog");
+ dev_info(&gsmi_dev.pdev->dev, "Failed to setup eventlog");
goto out_err;
}
/* Other attributes */
ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
if (ret) {
- printk(KERN_INFO "gsmi: Failed to add attrs");
+ dev_info(&gsmi_dev.pdev->dev, "Failed to add attrs");
goto out_remove_bin_file;
}
#ifdef CONFIG_EFI_VARS
ret = efivars_register(&efivars, &efivar_ops, gsmi_kobj);
if (ret) {
- printk(KERN_INFO "gsmi: Failed to register efivars\n");
+ dev_info(&gsmi_dev.pdev->dev, "Failed to register efivars\n");
sysfs_remove_files(gsmi_kobj, gsmi_attrs);
goto out_remove_bin_file;
}
@@ -1002,7 +1007,8 @@ static __init int gsmi_init(void)
atomic_notifier_chain_register(&panic_notifier_list,
&gsmi_panic_notifier);
- printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
+ dev_info(&gsmi_dev.pdev->dev,
+ "gsmi version " DRIVER_VERSION " loaded\n");
return 0;
--
2.20.1