[PATCH v7 1/5] usb: fsl: Set USB_EN bit to select ULPI phy

[Yinbo Zhu]

From: Nikhil Badola <nikhil.badola@xxxxxxxxxxxxx>

Set USB_EN bit to select ULPI phy for USB controller version 2.5

Signed-off-by: Nikhil Badola <nikhil.badola@xxxxxxxxxxxxx>
Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
---
 drivers/usb/host/ehci-fsl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index e3d0c1c25160..38674b7aa51e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -122,6 +122,12 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
 		tmp |= 0x4;
 		iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
 	}
+
+	/* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */
+	if (pdata->controller_ver == FSL_USB_VER_2_5 &&
+	    pdata->phy_mode == FSL_USB2_PHY_ULPI)
+		iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL);
+
 	/*
 	 * Enable UTMI phy and program PTS field in UTMI mode before asserting
 	 * controller reset for USB Controller version 2.5
-- 
2.17.1