[PATCH 0/6] net: macb patch set cover letter

From: Parshuram Thombare
Date: Sat Jun 15 2019 - 19:50:42 EST


Hello !,

This is second version of patch set containing following patches
for Cadence ethernet controller driver.

1. 0001-net-macb-add-phylink-support.patch
Replace phylib API's with phylink API's.
2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch
This patch add support for SGMII mode.
3. 003-net-macb-add-PHY-configuration-in-MACB-PCI-wrapper.patch
This patch is to configure TI PHY DP83867 in SGMII mode from
our MAC PCI wrapper driver.
With this change there is no need of PHY driver and dp83867
module must be disabled. Users wanting to setup DP83867 PHY
in SGMII mode can disable dp83867.ko driver, else dp83867.ko
overwrite this configuration and PHY is setup as per dp83867.ko.
4. 0004-net-macb-add-support-for-c45-PHY.patch
This patch is to support C45 PHY.
5. 0005-net-macb-add-support-for-high-speed-interface
This patch add support for 10G USXGMII PCS in fixed mode.
Since emulated PHY used in fixed mode doesn't seems to
support anything above 1G, additional parameter is used outside
"fixed-link" node for selecting speed and "fixed-link"
node speed is still set at 1G.
6. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding
New parameters added to Cadence ethernet controller DT binding
for USXGMII interface.

Regards,
Parshuram Thombare

Parshuram Thombare (6):
net: macb: add phylink support
net: macb: add support for sgmii MAC-PHY interface
net: macb: add PHY configuration in MACB PCI wrapper
net: macb: add support for c45 PHY
net: macb: add support for high speed interface
net: macb: parameter added to cadence ethernet controller DT binding

.../devicetree/bindings/net/macb.txt | 4 +
drivers/net/ethernet/cadence/Kconfig | 2 +-
drivers/net/ethernet/cadence/macb.h | 136 +++-
drivers/net/ethernet/cadence/macb_main.c | 659 ++++++++++++++----
drivers/net/ethernet/cadence/macb_pci.c | 225 ++++++
5 files changed, 860 insertions(+), 166 deletions(-)

--
2.17.1