Re: [linux-sunxi] [PATCH v2 5/9] drm/sun4i: tcon_top: Register clock gates in probe

[Chen-Yu Tsai]

On Sat, Jun 15, 2019 at 12:44 AM Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> wrote:
>
> TCON TOP have clock gates for TV0, TV1, dsi and right
> now these are register during bind call.
>
> Of which, dsi clock gate would required during DPHY probe
> but same can miss to get since tcon top is not bound at
> that time.
>
> To solve, this circular dependency move the clock gate
> registration from bind to probe so-that DPHY can get the
> dsi gate clock on time.
>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 94 ++++++++++++++------------
>  1 file changed, 49 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> index 465e9b0cdfee..a8978b3fe851 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> @@ -124,7 +124,53 @@ static struct clk_hw *sun8i_tcon_top_register_gate(struct device *dev,
>  static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
>                                void *data)
>  {
> -       struct platform_device *pdev = to_platform_device(dev);
> +       struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev);
> +       int ret;
> +
> +       ret = reset_control_deassert(tcon_top->rst);
> +       if (ret) {
> +               dev_err(dev, "Could not deassert ctrl reset control\n");
> +               return ret;
> +       }
> +
> +       ret = clk_prepare_enable(tcon_top->bus);
> +       if (ret) {
> +               dev_err(dev, "Could not enable bus clock\n");
> +               goto err_assert_reset;
> +       }

You have to de-assert the reset control and enable the clock before the
clocks it provides are registered. Otherwise a consumer may come in and
ask for the provided clock to be enabled, but since the TCON TOP's own
reset and clock are still disabled, you can't actually access the registers
that controls the provided clock.

> +
> +       return 0;
> +
> +err_assert_reset:
> +       reset_control_assert(tcon_top->rst);
> +
> +       return ret;
> +}
> +
> +static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
> +                                 void *data)
> +{
> +       struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev);
> +       struct clk_hw_onecell_data *clk_data = tcon_top->clk_data;
> +       int i;
> +
> +       of_clk_del_provider(dev->of_node);
> +       for (i = 0; i < CLK_NUM; i++)
> +               if (clk_data->hws[i])
> +                       clk_hw_unregister_gate(clk_data->hws[i]);

And this should be in the remove function.

So instead, just move _everything_ to the probe and remove functions,
and provide empty bind/unbind functions so the component system still
works.

ChenYu

> +
> +       clk_disable_unprepare(tcon_top->bus);
> +       reset_control_assert(tcon_top->rst);
> +}
> +
> +static const struct component_ops sun8i_tcon_top_ops = {
> +       .bind   = sun8i_tcon_top_bind,
> +       .unbind = sun8i_tcon_top_unbind,
> +};
> +
> +static int sun8i_tcon_top_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
>         struct clk_hw_onecell_data *clk_data;
>         struct sun8i_tcon_top *tcon_top;
>         const struct sun8i_tcon_top_quirks *quirks;
> @@ -132,7 +178,7 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
>         void __iomem *regs;
>         int ret, i;
>
> -       quirks = of_device_get_match_data(&pdev->dev);
> +       quirks = of_device_get_match_data(dev);
>
>         tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL);
>         if (!tcon_top)
> @@ -164,18 +210,6 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
>         if (IS_ERR(regs))
>                 return PTR_ERR(regs);
>
> -       ret = reset_control_deassert(tcon_top->rst);
> -       if (ret) {
> -               dev_err(dev, "Could not deassert ctrl reset control\n");
> -               return ret;
> -       }
> -
> -       ret = clk_prepare_enable(tcon_top->bus);
> -       if (ret) {
> -               dev_err(dev, "Could not enable bus clock\n");
> -               goto err_assert_reset;
> -       }
> -
>         /*
>          * At least on H6, some registers have some bits set by default
>          * which may cause issues. Clear them here.
> @@ -226,45 +260,15 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
>
>         dev_set_drvdata(dev, tcon_top);
>
> -       return 0;
> +       return component_add(dev, &sun8i_tcon_top_ops);
>
>  err_unregister_gates:
>         for (i = 0; i < CLK_NUM; i++)
>                 if (!IS_ERR_OR_NULL(clk_data->hws[i]))
>                         clk_hw_unregister_gate(clk_data->hws[i]);
> -       clk_disable_unprepare(tcon_top->bus);
> -err_assert_reset:
> -       reset_control_assert(tcon_top->rst);
> -
>         return ret;
>  }
>
> -static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
> -                                 void *data)
> -{
> -       struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev);
> -       struct clk_hw_onecell_data *clk_data = tcon_top->clk_data;
> -       int i;
> -
> -       of_clk_del_provider(dev->of_node);
> -       for (i = 0; i < CLK_NUM; i++)
> -               if (clk_data->hws[i])
> -                       clk_hw_unregister_gate(clk_data->hws[i]);
> -
> -       clk_disable_unprepare(tcon_top->bus);
> -       reset_control_assert(tcon_top->rst);
> -}
> -
> -static const struct component_ops sun8i_tcon_top_ops = {
> -       .bind   = sun8i_tcon_top_bind,
> -       .unbind = sun8i_tcon_top_unbind,
> -};
> -
> -static int sun8i_tcon_top_probe(struct platform_device *pdev)
> -{
> -       return component_add(&pdev->dev, &sun8i_tcon_top_ops);
> -}
> -
>  static int sun8i_tcon_top_remove(struct platform_device *pdev)
>  {
>         component_del(&pdev->dev, &sun8i_tcon_top_ops);
> --
> 2.18.0.321.gffc6fa0e3
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190614164324.9427-6-jagan%40amarulasolutions.com.
> For more options, visit https://groups.google.com/d/optout.