[PATCH] e1000e: Make watchdog use delayed work
From: Detlev Casanova
Date: Mon Jun 17 2019 - 15:59:29 EST
Use delayed work instead of timers to run the watchdog of the e1000e
driver.
Simplify the code with one less middle function.
Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxx>
---
drivers/net/ethernet/intel/e1000e/e1000.h | 3 +-
drivers/net/ethernet/intel/e1000e/netdev.c | 52 +++++++++++-----------
2 files changed, 28 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index be13227f1697..942ab74030ca 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -186,12 +186,11 @@ struct e1000_phy_regs {
/* board specific private data structure */
struct e1000_adapter {
- struct timer_list watchdog_timer;
struct timer_list phy_info_timer;
struct timer_list blink_timer;
struct work_struct reset_task;
- struct work_struct watchdog_task;
+ struct delayed_work watchdog_task;
const struct e1000_info *ei;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 0e09bede42a2..f62434aa24ad 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -39,6 +39,8 @@ static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+static struct workqueue_struct *e1000_workqueue;
+
static const struct e1000_info *e1000_info_tbl[] = {
[board_82571] = &e1000_82571_info,
[board_82572] = &e1000_82572_info,
@@ -1780,7 +1782,7 @@ static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data)
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ queue_delayed_work(e1000_workqueue, &adapter->watchdog_task, 1);
}
/* Reset on uncorrectable ECC error */
@@ -1860,7 +1862,7 @@ static irqreturn_t e1000_intr(int __always_unused irq, void *data)
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ queue_delayed_work(e1000_workqueue, &adapter->watchdog_task, 1);
}
/* Reset on uncorrectable ECC error */
@@ -1905,7 +1907,7 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
hw->mac.get_link_status = true;
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ queue_delayed_work(e1000_workqueue, &adapter->watchdog_task, 0);
}
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -4278,7 +4280,6 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset)
napi_synchronize(&adapter->napi);
- del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
spin_lock(&adapter->stats64_lock);
@@ -5150,25 +5151,11 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
}
}
-/**
- * e1000_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void e1000_watchdog(struct timer_list *t)
-{
- struct e1000_adapter *adapter = from_timer(adapter, t, watchdog_timer);
-
- /* Do the rest outside of interrupt context */
- schedule_work(&adapter->watchdog_task);
-
- /* TODO: make this use queue_delayed_work() */
-}
-
static void e1000_watchdog_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter,
- watchdog_task);
+ watchdog_task.work);
struct net_device *netdev = adapter->netdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_phy_info *phy = &adapter->hw.phy;
@@ -5395,8 +5382,8 @@ static void e1000_watchdog_task(struct work_struct *work)
/* Reset the timer */
if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + 2 * HZ));
+ queue_delayed_work(e1000_workqueue, &adapter->watchdog_task,
+ round_jiffies(2 * HZ));
}
#define E1000_TX_FLAGS_CSUM 0x00000001
@@ -7251,11 +7238,21 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_eeprom;
}
- timer_setup(&adapter->watchdog_timer, e1000_watchdog, 0);
+ e1000_workqueue = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
+ e1000e_driver_name);
+
+ if (!e1000_workqueue)
+ {
+ err = -ENOMEM;
+ goto err_workqueue;
+ }
+
+ INIT_DELAYED_WORK(&adapter->watchdog_task, e1000_watchdog_task);
+ queue_delayed_work(e1000_workqueue, &adapter->watchdog_task, 0);
+
timer_setup(&adapter->phy_info_timer, e1000_update_phy_info, 0);
INIT_WORK(&adapter->reset_task, e1000_reset_task);
- INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
@@ -7349,6 +7346,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
err_register:
+ flush_workqueue(e1000_workqueue);
+ destroy_workqueue(e1000_workqueue);
+err_workqueue:
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
@@ -7395,15 +7395,17 @@ static void e1000_remove(struct pci_dev *pdev)
*/
if (!down)
set_bit(__E1000_DOWN, &adapter->state);
- del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
cancel_work_sync(&adapter->reset_task);
- cancel_work_sync(&adapter->watchdog_task);
cancel_work_sync(&adapter->downshift_task);
cancel_work_sync(&adapter->update_phy_task);
cancel_work_sync(&adapter->print_hang_task);
+ cancel_delayed_work(&adapter->watchdog_task);
+ flush_workqueue(e1000_workqueue);
+ destroy_workqueue(e1000_workqueue);
+
if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
cancel_work_sync(&adapter->tx_hwtstamp_work);
if (adapter->tx_hwtstamp_skb) {
--
2.22.0