Re: [PATCH v2 0/2] Add macb support for SiFive FU540-C000

[Anup Patel]

On Tue, Jun 18, 2019 at 8:56 AM Paul Walmsley <paul.walmsley@xxxxxxxxxx> wrote:
>
> On Mon, 17 Jun 2019, Alistair Francis wrote:
>
> > > The legacy M-mode U-boot handles the phy reset already, and Iâve been
> > > able to load upstream S-mode uboot as a payload via TFTP, and then
> > > load and boot a 4.19 kernel.
> > >
> > > It would be nice to get this all working with 5.x, however there are
> > > still
> > > several missing pieces to really have it work well.
> >
> > Let me know what is still missing/doesn't work and I can add it. At the
> > moment the only known issue I know of is a missing SD card driver in U-
> > Boot.
>
> The DT data has changed between the non-upstream data that people
> developed against previously, vs. the DT data that just went upstream
> here:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=72296bde4f4207566872ee355950a59cbc29f852
>
> and
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c35f1b87fc595807ff15d2834d241f9771497205
>
> So Upstream U-Boot is going to need several patches to get things working
> again.  Clock identifiers and Ethernet are two known areas.

Done.

I just send-out few patches to fix U-Boot SiFive Clock driver.

The U-Boot SiFive Clock driver fix series can be found in
riscv_unleashed_clk_sync_v1 branch of:
https://github.com/avpatel/u-boot.git

Users will also require OpenSBI DTB fix which can be found
in sifive_unleashed_dtb_fix_v1 branch of:
https://github.com/avpatel/opensbi.git

With above fixes, we can now use same DTB for both U-Boot
and Linux kernel (5.2-rc1). Although, users are free to pass a
different DTB to Linux kernel via TFTP.

I have tested SiFive serial and Cadance MACB ethernet on
both U-Boot and Linux (5.2-rc1)

Regards,
Anup