Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings

[masonccyang]

Hi Marek, 

> Subject
> 
> Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF 

> controller bindings
> 
> On 6/6/19 9:40 AM, masonccyang@xxxxxxxxxxx wrote:
> [...]
> 
> > RPC-IF works either in SPI or HyperFlash is decided by external 
hardware 
> > pins 
> > configuration and it can NOT switch it's operation mode in the run 
time. 
> > This is not like my understanding of MFD.
> 
> Which external hardware pins decide the RPC configuration ?
> 
> It seems to me like PHYCNT register, PHYMEM bitfield, selects what
> device is connected, and then a couple of other bits control the
> communication, but I see nothing which would be tied to any external
> configuration pins.
> 

You may refer to R-Car D3 Draak Eva. board hardware manual 
and start-up guide, i.e., 
Table 2.12 Pin Multiplexing of R-Car D3 Mode setting pins and
set by hardware switch 1, 2, 3, 13, 31 and 10 to configure
booting from SPI mode or HyperFlash mode.

thanks & best regards,
Mason

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================