Re: [PATCH v5 07/14] soc: mediatek: Refactor sram control

[Weiyi Lu]

On Tue, 2019-03-19 at 20:07 +0800, Nicolas Boichat wrote:
> On Tue, Mar 19, 2019 at 4:02 PM Weiyi Lu <weiyi.lu@xxxxxxxxxxxx> wrote:
> >
> > Put sram enable and disable control in separate functions.
> >
> > Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> 
> Refactoring looks ok, just a small comment.
> 
> Reviewed-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> 
> > ---
> >  drivers/soc/mediatek/mtk-scpsys.c | 79 ++++++++++++++++++++-----------
> >  1 file changed, 51 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index 3e9be07a2627..65b734b40098 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -235,12 +235,55 @@ static void scpsys_clk_disable(struct clk *clk[], int max_num)
> >         }
> >  }
> >
> > +static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)
> > +{
> > +       u32 val;
> > +       u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
> > +       int tmp;
> > +
> > +       val = readl(ctl_addr) & ~scpd->data->sram_pdn_bits;
> > +       writel(val, ctl_addr);
> > +
> > +       /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
> > +       if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
> > +               /*
> > +                * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
> > +                * MT7622_POWER_DOMAIN_WB and thus just a trivial setup
> > +                * is applied here.
> > +                */
> > +               usleep_range(12000, 12100);
> 
> Does the range really need to be so tight? Would 12000, 13000 also be ok?
> 

I think Sean could give you a more accurate answer.

Hi Sean, would you mind answering this question?

> > +       } else {
> > +               /* Either wait until SRAM_PDN_ACK all 1 or 0 */
> > +               int ret = readl_poll_timeout(ctl_addr, tmp,
> > +                               (tmp & pdn_ack) == 0,
> > +                               MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > +               if (ret < 0)
> > +                       return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
> > +{
> > +       u32 val;
> > +       u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
> > +       int tmp;
> > +
> > +       val = readl(ctl_addr) | scpd->data->sram_pdn_bits;
> > +       writel(val, ctl_addr);
> > +
> > +       /* Either wait until SRAM_PDN_ACK all 1 or 0 */
> > +       return readl_poll_timeout(ctl_addr, tmp,
> > +                       (tmp & pdn_ack) == pdn_ack,
> > +                       MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > +}
> > +
> >  static int scpsys_power_on(struct generic_pm_domain *genpd)
> >  {
> >         struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
> >         struct scp *scp = scpd->scp;
> >         void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
> > -       u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
> >         u32 val;
> >         int ret, tmp;
> >
> > @@ -252,6 +295,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
> >         if (ret)
> >                 goto err_clk;
> >
> > +       /* subsys power on */
> >         val = readl(ctl_addr);
> >         val |= PWR_ON_BIT;
> >         writel(val, ctl_addr);
> > @@ -273,24 +317,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
> >         val |= PWR_RST_B_BIT;
> >         writel(val, ctl_addr);
> >
> > -       val &= ~scpd->data->sram_pdn_bits;
> > -       writel(val, ctl_addr);
> > -
> > -       /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
> > -       if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
> > -               /*
> > -                * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
> > -                * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is
> > -                * applied here.
> > -                */
> > -               usleep_range(12000, 12100);
> > -
> > -       } else {
> > -               ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0,
> > -                                        MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > -               if (ret < 0)
> > -                       goto err_pwr_ack;
> > -       }
> > +       ret = scpsys_sram_enable(scpd, ctl_addr);
> > +       if (ret < 0)
> > +               goto err_pwr_ack;
> >
> >         if (scpd->data->bus_prot_mask) {
> >                 ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
> > @@ -317,7 +346,6 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
> >         struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
> >         struct scp *scp = scpd->scp;
> >         void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
> > -       u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
> >         u32 val;
> >         int ret, tmp;
> >
> > @@ -329,17 +357,12 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
> >                         goto out;
> >         }
> >
> > -       val = readl(ctl_addr);
> > -       val |= scpd->data->sram_pdn_bits;
> > -       writel(val, ctl_addr);
> > -
> > -       /* wait until SRAM_PDN_ACK all 1 */
> > -       ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack,
> > -                                MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > +       ret = scpsys_sram_disable(scpd, ctl_addr);
> >         if (ret < 0)
> >                 goto out;
> >
> > -       val |= PWR_ISO_BIT;
> > +       /* subsys power off */
> > +       val = readl(ctl_addr) | PWR_ISO_BIT;
> >         writel(val, ctl_addr);
> >
> >         val &= ~PWR_RST_B_BIT;
> > --
> > 2.18.0
> >