Re: [PATCH V10 13/15] phy: tegra: Add PCIe PIPE2UPHY support
From: Kishon Vijay Abraham I
Date: Thu Jun 20 2019 - 03:31:34 EST
On 12/06/19 3:23 PM, Vidya Sagar wrote:
> Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface
> with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module.
> For each PCIe lane of a controller, there is a P2U unit instantiated at
> hardware level. This driver provides support for the programming required
> for each P2U that is going to be used for a PCIe controller.
One minor comment below. With that fixed
Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> Changes since [v9]:
> * Used _relaxed() versions of readl() & writel()
>
> Changes since [v8]:
> * Made it dependent on ARCH_TEGRA_194_SOC directly instead of ARCH_TEGRA
>
> Changes since [v7]:
> * Changed P2U driver file name from pcie-p2u-tegra194.c to phy-tegra194-p2u.c
>
> Changes since [v6]:
> * None
>
> Changes since [v5]:
> * Addressed review comments from Thierry
>
> Changes since [v4]:
> * None
>
> Changes since [v3]:
> * Rebased on top of linux-next top of the tree
>
> Changes since [v2]:
> * Replaced spaces with tabs in Kconfig file
> * Sorted header file inclusion alphabetically
>
> Changes since [v1]:
> * Added COMPILE_TEST in Kconfig
> * Removed empty phy_ops implementations
> * Modified code according to DT documentation file modifications
>
> drivers/phy/tegra/Kconfig | 7 ++
> drivers/phy/tegra/Makefile | 1 +
> drivers/phy/tegra/phy-tegra194-p2u.c | 120 +++++++++++++++++++++++++++
> 3 files changed, 128 insertions(+)
> create mode 100644 drivers/phy/tegra/phy-tegra194-p2u.c
>
> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
> index e516967d695b..f9817c3ae85f 100644
> --- a/drivers/phy/tegra/Kconfig
> +++ b/drivers/phy/tegra/Kconfig
> @@ -7,3 +7,10 @@ config PHY_TEGRA_XUSB
>
> To compile this driver as a module, choose M here: the module will
> be called phy-tegra-xusb.
> +
> +config PHY_TEGRA194_P2U
> + tristate "NVIDIA Tegra194 PIPE2UPHY PHY driver"
> + depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
> + select GENERIC_PHY
> + help
> + Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs.
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index 64ccaeacb631..320dd389f34d 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -6,3 +6,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
> +obj-$(CONFIG_PHY_TEGRA194_P2U) += phy-tegra194-p2u.o
> diff --git a/drivers/phy/tegra/phy-tegra194-p2u.c b/drivers/phy/tegra/phy-tegra194-p2u.c
> new file mode 100644
> index 000000000000..df009abd2482
> --- /dev/null
> +++ b/drivers/phy/tegra/phy-tegra194-p2u.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * P2U (PIPE to UPHY) driver for Tegra T194 SoC
> + *
> + * Copyright (C) 2019 NVIDIA Corporation.
> + *
> + * Author: Vidya Sagar <vidyas@xxxxxxxxxx>
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +
> +#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0
> +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN BIT(0)
> +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN BIT(1)
> +#define P2U_PERIODIC_EQ_CTRL_GEN4 0xc4
> +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN BIT(1)
> +
> +#define P2U_RX_DEBOUNCE_TIME 0xa4
> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK 0xffff
> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL 160
> +
> +struct tegra_p2u {
> + void __iomem *base;
> +};
> +
> +static inline void p2u_writel(struct tegra_p2u *phy, const u32 value,
> + const u32 reg)
> +{
> + writel_relaxed(value, phy->base + reg);
> +}
> +
> +static inline u32 p2u_readl(struct tegra_p2u *phy, const u32 reg)
> +{
> + return readl_relaxed(phy->base + reg);
> +}
> +
> +static int tegra_p2u_power_on(struct phy *x)
> +{
> + struct tegra_p2u *phy = phy_get_drvdata(x);
> + u32 val;
> +
> + val = p2u_readl(phy, P2U_PERIODIC_EQ_CTRL_GEN3);
> + val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN;
> + val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN;
> + p2u_writel(phy, val, P2U_PERIODIC_EQ_CTRL_GEN3);
> +
> + val = p2u_readl(phy, P2U_PERIODIC_EQ_CTRL_GEN4);
> + val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN;
> + p2u_writel(phy, val, P2U_PERIODIC_EQ_CTRL_GEN4);
> +
> + val = p2u_readl(phy, P2U_RX_DEBOUNCE_TIME);
> + val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK;
> + val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL;
> + p2u_writel(phy, val, P2U_RX_DEBOUNCE_TIME);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops ops = {
> + .power_on = tegra_p2u_power_on,
> + .owner = THIS_MODULE,
> +};
> +
> +static int tegra_p2u_probe(struct platform_device *pdev)
> +{
> + struct phy_provider *phy_provider;
> + struct device *dev = &pdev->dev;
> + struct phy *generic_phy;
> + struct tegra_p2u *phy;
> + struct resource *res;
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl");
> + phy->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(phy->base))
> + return PTR_ERR_OR_ZERO(phy->base);
> +
> + platform_set_drvdata(pdev, phy);
> +
> + generic_phy = devm_phy_create(dev, NULL, &ops);
> + if (IS_ERR(generic_phy))
> + return PTR_ERR_OR_ZERO(generic_phy);
> +
> + phy_set_drvdata(generic_phy, phy);
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR_OR_ZERO(phy_provider);
> +
> + return 0;
Just make this..
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
Thanks
Kishon