[PATCH 3/5] usb: xhci: Use register defined and field names
From: Vinod Koul
Date: Thu Jun 20 2019 - 06:30:43 EST
Instead of using register values and fields lets define them and
use in the driver.
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Cc: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-pci.c | 68 +++++++++++++++++++++++++------------
1 file changed, 47 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 38a56128c1ee..a9497c6e3568 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -57,6 +57,27 @@
#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
+#define RENESAS_FW_VERSION 0x6C
+#define RENESAS_ROM_CONFIG 0xF0
+#define RENESAS_FW_STATUS 0xF4
+#define RENESAS_FW_STATUS_MSB 0xF5
+#define RENESAS_ROM_STATUS 0xF6
+#define RENESAS_ROM_STATUS_MSB 0xF7
+#define RENESAS_DATA0 0xF8
+#define RENESAS_DATA1 0xFC
+
+#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7)
+#define RENESAS_FW_VERSION_OFFSET 8
+
+#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0)
+#define RENESAS_FW_STATUS_LOCK BIT(1)
+#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4)
+ #define RENESAS_FW_STATUS_INVALID 0
+ #define RENESAS_FW_STATUS_SUCCESS BIT(4)
+ #define RENESAS_FW_STATUS_ERROR BIT(5)
+#define RENESAS_FW_STATUS_SET_DATA0 BIT(8)
+#define RENESAS_FW_STATUS_SET_DATA1 BIT(9)
+
static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -342,7 +363,8 @@ static int renesas_fw_download_image(struct pci_dev *dev,
/* step+1. Read "Set DATAX" and confirm it is cleared. */
for (i = 0; i < 10000; i++) {
- err = pci_read_config_byte(dev, 0xF5, &fw_status);
+ err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB,
+ &fw_status);
if (err)
return pcibios_err_to_errno(err);
if (!(fw_status & BIT(data0_or_data1)))
@@ -357,7 +379,8 @@ static int renesas_fw_download_image(struct pci_dev *dev,
* step+2. Write FW data to "DATAX".
* "LSB is left" => force little endian
*/
- err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
+ err = pci_write_config_dword(dev, data0_or_data1 ?
+ RENESAS_DATA1 : RENESAS_DATA0,
(__force u32) cpu_to_le32(fw[step]));
if (err)
return pcibios_err_to_errno(err);
@@ -365,7 +388,8 @@ static int renesas_fw_download_image(struct pci_dev *dev,
udelay(100);
/* step+3. Set "Set DATAX". */
- err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
+ err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB,
+ BIT(data0_or_data1));
if (err)
return pcibios_err_to_errno(err);
@@ -439,7 +463,7 @@ static int renesas_fw_check_running(struct pci_dev *pdev)
* BIOSes will initialize the device for us. If the device is
* initialized.
*/
- err = pci_read_config_byte(pdev, 0xF4, &fw_state);
+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
if (err)
return pcibios_err_to_errno(err);
@@ -448,10 +472,10 @@ static int renesas_fw_check_running(struct pci_dev *pdev)
* ready we can simply continue. If the FW is not ready, we have
* to give up.
*/
- if (fw_state & BIT(1)) {
+ if (fw_state & RENESAS_FW_STATUS_LOCK) {
dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
- if (fw_state & BIT(4))
+ if (fw_state & RENESAS_FW_STATUS_SUCCESS)
return 0;
dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
@@ -463,30 +487,30 @@ static int renesas_fw_check_running(struct pci_dev *pdev)
* with it and it can't be resetted, we have to give up too... and
* ask for a forgiveness and a reboot.
*/
- if (fw_state & BIT(0)) {
+ if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
return -EIO;
}
/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
- switch ((fw_state & 0x70)) {
+ switch (fw_state & RENESAS_FW_STATUS_RESULT) {
case 0: /* No result yet */
dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
/* tell the caller, that this device needs the firmware. */
return 1;
- case BIT(4): /* Success, device should be working. */
+ case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
dev_dbg(&pdev->dev, "FW is ready.");
return 0;
- case BIT(5): /* Error State */
+ case RENESAS_FW_STATUS_ERROR: /* Error State */
dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
return -ENODEV;
default: /* All other states are marked as "Reserved states" */
- dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
- (fw_state & 0x70) >> 4);
+ dev_err(&pdev->dev, "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
+ (fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
return -EINVAL;
}
}
@@ -530,7 +554,8 @@ static int renesas_fw_download(struct pci_dev *pdev,
* 0. Set "FW Download Enable" bit in the
* "FW Download Control & Status Register" at 0xF4
*/
- err = pci_write_config_byte(pdev, 0xF4, BIT(0));
+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
+ RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
if (err)
return pcibios_err_to_errno(err);
@@ -550,7 +575,8 @@ static int renesas_fw_download(struct pci_dev *pdev,
* is cleared by the hardware beforehand.
*/
for (i = 0; i < 10000; i++) {
- err = pci_read_config_byte(pdev, 0xF5, &fw_status);
+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
+ &fw_status);
if (err)
return pcibios_err_to_errno(err);
if (!(fw_status & (BIT(0) | BIT(1))))
@@ -565,16 +591,16 @@ static int renesas_fw_download(struct pci_dev *pdev,
* 11. After finishing writing the last data of FW, the
* System Software must clear "FW Download Enable"
*/
- err = pci_write_config_byte(pdev, 0xF4, 0);
+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
if (err)
return pcibios_err_to_errno(err);
/* 12. Read "Result Code" and confirm it is good. */
for (i = 0; i < 10000; i++) {
- err = pci_read_config_byte(pdev, 0xF4, &fw_status);
+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
if (err)
return pcibios_err_to_errno(err);
- if (fw_status & BIT(4))
+ if (fw_status & RENESAS_FW_STATUS_SUCCESS)
break;
udelay(1);
@@ -757,21 +783,21 @@ static int renesas_check_if_fw_dl_is_needed(struct pci_dev *pdev)
* Test if the firmware was uploaded and is running.
* As most BIOSes will initialize the device for us.
*/
- err = pci_read_config_byte(pdev, 0xf4, &fw_state);
+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
if (err)
return pcibios_err_to_errno(err);
/* Check the "Result Code" Bits (6:4) and act accordingly */
- switch (fw_state & 0x70) {
+ switch (fw_state & RENESAS_FW_STATUS_RESULT) {
case 0: /* No result yet */
dev_err(&pdev->dev, "FW is not ready/loaded yet.");
return -ENODEV;
- case BIT(4): /* Success, device should be working. */
+ case RENESAS_FW_STATUS_SUCCESS:
dev_dbg(&pdev->dev, "FW is ready.");
return 0;
- case BIT(5): /* Error State */
+ case RENESAS_FW_STATUS_ERROR:
dev_err(&pdev->dev, "HW is in an error state.");
return -ENODEV;
--
2.20.1