[PATCH v7 1/6] net: stmmac: sun8i: add support for Allwinner H6 EMAC

[megous]

From: Icenowy Zheng <icenowy@xxxxxxx>

The EMAC on Allwinner H6 is just like the one on A64. The "internal PHY" on
H6 is on a co-packaged AC200 chip, and it's not really internal (it's
connected via RMII at PA GPIO bank).

Add support for the Allwinner H6 EMAC in the dwmac-sun8i driver.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
---
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index b15c6d5dbd38..c3e94104474f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -138,6 +138,20 @@ static const struct emac_variant emac_variant_a64 = {
 	.tx_delay_max = 7,
 };
 
+static const struct emac_variant emac_variant_h6 = {
+	.default_syscon_value = 0x50000,
+	.syscon_field = &sun8i_syscon_reg_field,
+	/* The "Internal PHY" of H6 is not on the die. It's on the
+	 * co-packaged AC200 chip instead.
+	 */
+	.soc_has_internal_phy = false,
+	.support_mii = true,
+	.support_rmii = true,
+	.support_rgmii = true,
+	.rx_delay_max = 31,
+	.tx_delay_max = 7,
+};
+
 #define EMAC_BASIC_CTL0 0x00
 #define EMAC_BASIC_CTL1 0x04
 #define EMAC_INT_STA    0x08
@@ -1216,6 +1230,8 @@ static const struct of_device_id sun8i_dwmac_match[] = {
 		.data = &emac_variant_r40 },
 	{ .compatible = "allwinner,sun50i-a64-emac",
 		.data = &emac_variant_a64 },
+	{ .compatible = "allwinner,sun50i-h6-emac",
+		.data = &emac_variant_h6 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun8i_dwmac_match);
-- 
2.22.0