[PATCH] regulator: qcom_spmi: Do NULL check for lvs

[Jeffrey Hugo]

Low-voltage switches (lvs) don't have set_points since the voltage ranges
of the output are really controlled by the inputs.  This is a problem for
the newly added linear range support in the probe(), as that will cause
a null pointer dereference error on older platforms like msm8974 which
happen to need to control some of the implemented lvs.

Fix this by adding the appropriate null check.

Fixes: 86f4ff7a0c0c ("regulator: qcom_spmi: enable linear range info")
Reported-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
---
 drivers/regulator/qcom_spmi-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 877df33e0246..7f51c5fc8194 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -2045,7 +2045,7 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 			}
 		}
 
-		if (vreg->set_points->count == 1) {
+		if (vreg->set_points && vreg->set_points->count == 1) {
 			/* since there is only one range */
 			range = vreg->set_points->range;
 			vreg->desc.uV_step = range->step_uV;
-- 
2.17.1