[PATCH 2/2] pinctrl: ocelot: fix pinmuxing for pins after 31

From: Alexandre Belloni
Date: Thu Jun 20 2019 - 14:31:03 EST


The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins
is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0],
OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to
facilitate the register offset calculation and use it where necessary.

Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
drivers/pinctrl/pinctrl-ocelot.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index d2478db975bd..fb76fb2e9ea5 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -396,7 +396,7 @@ static int ocelot_pin_function_idx(struct ocelot_pinctrl *info,
return -1;
}

-#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+#define REG_ALT(msb, info, p) (OCELOT_GPIO_ALT0 * (info)->stride + 4 * ((msb) + ((info)->stride * ((p) / 32))))

static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,
unsigned int selector, unsigned int group)
@@ -412,19 +412,21 @@ static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,

/*
* f is encoded on two bits.
- * bit 0 of f goes in BIT(pin) of ALT0, bit 1 of f goes in BIT(pin) of
- * ALT1
+ * bit 0 of f goes in BIT(pin) of ALT[0], bit 1 of f goes in BIT(pin) of
+ * ALT[1]
* This is racy because both registers can't be updated at the same time
* but it doesn't matter much for now.
*/
- regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, pin->pin),
+ regmap_update_bits(info->map, REG_ALT(0, info, pin->pin),
BIT(p), f << p);
- regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, pin->pin),
+ regmap_update_bits(info->map, REG_ALT(1, info, pin->pin),
BIT(p), f << (p - 1));

return 0;
}

+#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+
static int ocelot_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int pin, bool input)
@@ -445,9 +447,9 @@ static int ocelot_gpio_request_enable(struct pinctrl_dev *pctldev,
struct ocelot_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
unsigned int p = offset % 32;

- regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, offset),
+ regmap_update_bits(info->map, REG_ALT(0, info, offset),
BIT(p), 0);
- regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, offset),
+ regmap_update_bits(info->map, REG_ALT(1, info, offset),
BIT(p), 0);

return 0;
--
2.21.0