[PATCH 3/4] scsi: sd_zbc: add zone open, close, and finish support

[Matias BjÃrling]

From: Ajay Joshi <ajay.joshi@xxxxxxx>

Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
support to allow explicit control of zone states.

Signed-off-by: Ajay Joshi <ajay.joshi@xxxxxxx>
---
 drivers/scsi/sd.c     | 15 ++++++++++++++-
 drivers/scsi/sd.h     |  6 ++++--
 drivers/scsi/sd_zbc.c | 18 +++++++++++++-----
 3 files changed, 31 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a3406bd62391..89f955a01d44 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1292,7 +1292,17 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 	case REQ_OP_WRITE:
 		return sd_setup_read_write_cmnd(cmd);
 	case REQ_OP_ZONE_RESET:
-		return sd_zbc_setup_reset_cmnd(cmd);
+		return sd_zbc_setup_zone_mgmt_op_cmnd(cmd,
+					ZO_RESET_WRITE_POINTER);
+	case REQ_OP_ZONE_OPEN:
+		return sd_zbc_setup_zone_mgmt_op_cmnd(cmd,
+					ZO_OPEN_ZONE);
+	case REQ_OP_ZONE_CLOSE:
+		return sd_zbc_setup_zone_mgmt_op_cmnd(cmd,
+					ZO_CLOSE_ZONE);
+	case REQ_OP_ZONE_FINISH:
+		return sd_zbc_setup_zone_mgmt_op_cmnd(cmd,
+					ZO_FINISH_ZONE);
 	default:
 		WARN_ON_ONCE(1);
 		return BLK_STS_NOTSUPP;
@@ -1958,6 +1968,9 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	case REQ_OP_WRITE_ZEROES:
 	case REQ_OP_WRITE_SAME:
 	case REQ_OP_ZONE_RESET:
+	case REQ_OP_ZONE_OPEN:
+	case REQ_OP_ZONE_CLOSE:
+	case REQ_OP_ZONE_FINISH:
 		if (!result) {
 			good_bytes = blk_rq_bytes(req);
 			scsi_set_resid(SCpnt, 0);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 5796ace76225..9a20633caefa 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -209,7 +209,8 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
 
 extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
 extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
-extern blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd);
+extern blk_status_t sd_zbc_setup_zone_mgmt_op_cmnd(struct scsi_cmnd *cmd,
+						   unsigned char op);
 extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 			    struct scsi_sense_hdr *sshdr);
 extern int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
@@ -226,7 +227,8 @@ static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
 
 static inline void sd_zbc_print_zones(struct scsi_disk *sdkp) {}
 
-static inline blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
+static inline blk_status_t sd_zbc_setup_zone_mgmt_op_cmnd(struct scsi_cmnd *cmd,
+							  unsigned char op)
 {
 	return BLK_STS_TARGET;
 }
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 7334024b64f1..41020db5353a 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -168,12 +168,17 @@ static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
 }
 
 /**
- * sd_zbc_setup_reset_cmnd - Prepare a RESET WRITE POINTER scsi command.
- * @cmd: the command to setup
+ * sd_zbc_setup_zone_mgmt_op_cmnd - Prepare a zone ZBC_OUT command. The
+ *                                  operations can be RESET WRITE POINTER,
+ *                                  OPEN, CLOSE or FINISH.
+ * @cmd: The command to setup
+ * @op: Operation to be performed
  *
- * Called from sd_init_command() for a REQ_OP_ZONE_RESET request.
+ * Called from sd_init_command() for REQ_OP_ZONE_RESET, REQ_OP_ZONE_OPEN,
+ * REQ_OP_ZONE_CLOSE or REQ_OP_ZONE_FINISH requests.
  */
-blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
+blk_status_t sd_zbc_setup_zone_mgmt_op_cmnd(struct scsi_cmnd *cmd,
+					    unsigned char op)
 {
 	struct request *rq = cmd->request;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
@@ -194,7 +199,7 @@ blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
 	cmd->cmd_len = 16;
 	memset(cmd->cmnd, 0, cmd->cmd_len);
 	cmd->cmnd[0] = ZBC_OUT;
-	cmd->cmnd[1] = ZO_RESET_WRITE_POINTER;
+	cmd->cmnd[1] = op;
 	put_unaligned_be64(block, &cmd->cmnd[2]);
 
 	rq->timeout = SD_TIMEOUT;
@@ -222,6 +227,9 @@ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 
 	switch (req_op(rq)) {
 	case REQ_OP_ZONE_RESET:
+	case REQ_OP_ZONE_OPEN:
+	case REQ_OP_ZONE_CLOSE:
+	case REQ_OP_ZONE_FINISH:
 
 		if (result &&
 		    sshdr->sense_key == ILLEGAL_REQUEST &&
-- 
2.19.1