Re: [PATCH v2] riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver
From: Troy Benjegerdes
Date: Fri Jun 21 2019 - 20:33:33 EST
> On Jun 21, 2019, at 4:59 PM, Atish Patra <Atish.Patra@xxxxxxx> wrote:
>
> On Fri, 2019-06-21 at 14:46 -0700, Atish Patra wrote:
>> On Fri, 2019-06-21 at 14:18 -0500, Troy Benjegerdes wrote:
>>> Can you post the fsbl and other images you used to boot/test this?
>>>
>>
>
> Resending it without the attachment. Obviously, the mail did not go
> through with the binary blob attached :( :(. My bad.
>
> Let me know if you still want me to share the binary with you. I will
> probably share it via some other method.
The bl came through as it was sent direct to me, and I can deal with
the tftp config manually. I have a kernel image, but not the boot.scr.uimg
that it looks like you are using. Is that from Yocto?
>
>> I have not changed fsbl. It's the default one came with the board.
>> Here are the heads of OpenSBI + U-Boot + Linux repo.
>>
>> OpenSBI: cd2dfdc870ed (master)
>> U-boot: 77f6e2dd0551 + Anup's patch series (v4)
>> https://github.com/atishp04/u-boot/tree/unleashed_working
>>
>> Linux: bed3c0d84e7e + Yash's Macb Series + this patch
>> https://github.com/atishp04/linux/tree/5.2-rc6-pre
>>
>> I have also attached the OpenSBI + U-boot binary as well. But this is
>> pre-configured with my tftpboot server. You need to change that.
>>
>>> I keep running into various failures when I build from source and I
>>> want to rule out potential hardware issues related to clock and/or
>>> ddr initialization
>>>
>>> On Fri, Jun 21, 2019, 2:14 PM Atish Patra <Atish.Patra@xxxxxxx>
>>> wrote:
>>>> On Fri, 2019-06-21 at 16:23 +0530, Yash Shah wrote:
>>>>> DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver
>>>> added
>>>>> Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>
>>>>> ---
>>>>> arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 16
>>>>> ++++++++++++++++
>>>>> arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 9
>>>> +++++++++
>>>>> 2 files changed, 25 insertions(+)
>>>>>
>>>>> diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>> b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>> index 4e8fbde..c53b4ea 100644
>>>>> --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>> +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>>>>> @@ -225,5 +225,21 @@
>>>>> #address-cells = <1>;
>>>>> #size-cells = <0>;
>>>>> };
>>>>> + eth0: ethernet@10090000 {
>>>>> + compatible = "sifive,fu540-macb";
>>>>> + interrupt-parent = <&plic0>;
>>>>> + interrupts = <53>;
>>>>> + reg = <0x0 0x10090000 0x0 0x2000
>>>>> + 0x0 0x100a0000 0x0 0x1000>;
>>>>> + reg-names = "control";
>>>>> + status = "disabled";
>>>>> + local-mac-address = [00 00 00 00 00 00];
>>>>> + clock-names = "pclk", "hclk";
>>>>> + clocks = <&prci PRCI_CLK_GEMGXLPLL>,
>>>>> + <&prci PRCI_CLK_GEMGXLPLL>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + };
>>>>> +
>>>>> };
>>>>> };
>>>>> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-
>>>>> a00.dts
>>>>> b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
>>>>> index 4da8870..d783bf2 100644
>>>>> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
>>>>> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
>>>>> @@ -63,3 +63,12 @@
>>>>> disable-wp;
>>>>> };
>>>>> };
>>>>> +
>>>>> +ð0 {
>>>>> + status = "okay";
>>>>> + phy-mode = "gmii";
>>>>> + phy-handle = <&phy1>;
>>>>> + phy1: ethernet-phy@0 {
>>>>> + reg = <0>;
>>>>> + };
>>>>> +};
>>>>
>>>> Thanks. I am able to boot Unleashed with networking enabled with
>>>> this
>>>> patch.
>>>>
>>>> FWIW,
>>>> Tested-by: Atish Patra <atish.patra@xxxxxxx>
>>>>
>>>> Regards,
>>>> Atish
>>>> _______________________________________________
>>>> linux-riscv mailing list
>>>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv