Re: [PATCH v3 0/5] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b

[H. Nikolaus Schaller]

Hi,

> Am 07.06.2019 um 13:11 schrieb H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>:
> 
> V3:
> * add bindings documentation (suggested by sam@xxxxxxxxxxxx)
> 
> V2 2019-06-05 07:07:05:
> * fix typo in 99dtc panel compatible string (reported by imirkin@xxxxxxxxxxxx)
> 
> V1 2019-06-04 14:53:00:
> 
> Since v5.2-rc1 OMAP is no longer using a special display driver architecture
> for DPI panels, but uses the general drm/panel/panel-simple.
> 
> So we finally can add SoC independent panel definitions for two panel models
> which we already had worked on quite a while ago (before device tree was
> introduced):
> 
> 	https://patchwork.kernel.org/patch/2851295/
> 
> 
> 
> H. Nikolaus Schaller (5):
>  drm/panel: simple: Add Sharp LQ070Y3DG3B panel support
>  drm/panel: simple: Add Ortustech COM37H3M panel support
>  dt-bindings: drm/panel: simple: add ortustech,com37h3m05dtc panel
>  dt-bindings: drm/panel: simple: add ortustech,com37h3m99dtc panel
>  dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel
> 
> .../display/panel/ortustech,com37h3m05dtc.txt | 12 ++++
> .../display/panel/ortustech,com37h3m99dtc.txt | 12 ++++
> .../display/panel/sharp,lq070y3dg3b.txt       | 12 ++++
> drivers/gpu/drm/panel/panel-simple.c          | 63 +++++++++++++++++++
> 4 files changed, 99 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
> create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt
> 
> -- 
> 2.19.1
> 

any progress towards merging this somewhere? It did not yet arrive in linux-next.

BTW: should also be applied to 5.2

BR and thanks,
Nikolaus