[PATCH v1 1/1] PCI/ERR: Update error status after reset_link()

[sathyanarayanan . kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>

Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors. But, if the reset is
successful there is no need to continue the rest of the error recovery
checks. Also, during fatal error recovery, if the initial value of error
status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then
even after successful recovery (using reset_link()) pcie_do_recovery()
will report the recovery result as failure. So update the status of
error after reset_link().

Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
Cc: Ashok Raj <ashok.raj@xxxxxxxxx>
Cc: Keith Busch <keith.busch@xxxxxxxxx>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
---
 drivers/pci/pcie/err.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 773197a12568..aecec124a829 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -204,9 +204,13 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	else
 		pci_walk_bus(bus, report_normal_detected, &status);
 
-	if (state == pci_channel_io_frozen &&
-	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
-		goto failed;
+	if (state == pci_channel_io_frozen) {
+		status = reset_link(dev, service);
+		if (status != PCI_ERS_RESULT_RECOVERED)
+			goto failed;
+		else
+			goto done;
+	}
 
 	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
 		status = PCI_ERS_RESULT_RECOVERED;
@@ -228,6 +232,7 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	if (status != PCI_ERS_RESULT_RECOVERED)
 		goto failed;
 
+done:
 	pci_dbg(dev, "broadcast resume message\n");
 	pci_walk_bus(bus, report_resume, &status);
 
-- 
2.21.0