[PATCH v4 2/2] dt-bindings: mtd: Document Macronix raw NAND controller bindings

[Mason Yang]

Document the bindings used by the Macronix raw NAND controller.

Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
---
 .../devicetree/bindings/mtd/mxic-nand.txt          | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
new file mode 100644
index 0000000..3d198e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
@@ -0,0 +1,26 @@
+Macronix Raw NAND Controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible: should be "mxic,raw-nand-ctlr"
+- reg: should contain 1 entrie for the registers
+- reg-names: should contain "regs"
+- interrupts: interrupt line connected to this NAND controller
+- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
+- clocks: should contain 3 entries for the "ps_clk", "send_clk" and
+	 "send_dly_clk" clocks
+
+Example:
+
+	nand: mxic-nfc@43c30000 {
+		compatible = "mxic,raw-nand-ctlr";
+		reg = <0x43c30000 0x10000>;
+		reg-names = "regs";
+		clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+		clock-names = "send_clk", "send_dly_clk", "ps_clk";
+
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <8>;
+	};
-- 
1.9.1