[RFC PATCH v1 05/13] powerpc/ptrace: split out ALTIVEC related functions.

[Christophe Leroy]

Move CONFIG_ALTIVEC functions out of ptrace.c, into
ptrace-altivec.c

Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
---
 arch/powerpc/kernel/ptrace/Makefile         |   1 +
 arch/powerpc/kernel/ptrace/ptrace-altivec.c | 151 ++++++++++++++++++++++++++++
 arch/powerpc/kernel/ptrace/ptrace-decl.h    |   9 ++
 arch/powerpc/kernel/ptrace/ptrace.c         | 124 -----------------------
 4 files changed, 161 insertions(+), 124 deletions(-)
 create mode 100644 arch/powerpc/kernel/ptrace/ptrace-altivec.c

diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index 238c27189078..522e6fd0b5b8 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_VSX)		+= ptrace-vsx.o
 ifneq ($(CONFIG_VSX),y)
 obj-y				+= ptrace-novsx.o
 endif
+obj-$(CONFIG_ALTIVEC)		+= ptrace-altivec.o
diff --git a/arch/powerpc/kernel/ptrace/ptrace-altivec.c b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
new file mode 100644
index 000000000000..0cb749164269
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the
+ * same structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	flush_altivec_to_thread(target);
+	return target->thread.used_vr ? regset->n : 0;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	vector128	vr[32];
+ *	vector128	vscr;
+ *	vector128	vrsave;
+ * };
+ */
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	flush_altivec_to_thread(target);
+
+	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+		     offsetof(struct thread_vr_state, vr[32]));
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.vr_state, 0,
+				  33 * sizeof(vector128));
+	if (!ret) {
+		/*
+		 * Copy out only the low-order word of vrsave.
+		 */
+		int start, end;
+		union {
+			elf_vrreg_t reg;
+			u32 word;
+		} vrsave;
+		memset(&vrsave, 0, sizeof(vrsave));
+
+		vrsave.word = target->thread.vrsave;
+
+		start = 33 * sizeof(vector128);
+		end = start + sizeof(vrsave);
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
+					  start, end);
+	}
+
+	return ret;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ *	vector128	vr[32];
+ *	vector128	vscr;
+ *	vector128	vrsave;
+ * };
+ */
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count,
+	   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	flush_altivec_to_thread(target);
+
+	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+		     offsetof(struct thread_vr_state, vr[32]));
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.vr_state, 0,
+				 33 * sizeof(vector128));
+	if (!ret && count > 0) {
+		/*
+		 * We use only the first word of vrsave.
+		 */
+		int start, end;
+		union {
+			elf_vrreg_t reg;
+			u32 word;
+		} vrsave;
+		memset(&vrsave, 0, sizeof(vrsave));
+
+		vrsave.word = target->thread.vrsave;
+
+		start = 33 * sizeof(vector128);
+		end = start + sizeof(vrsave);
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
+					 start, end);
+		if (!ret)
+			target->thread.vrsave = vrsave.word;
+	}
+
+	return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index fc4dc598bc1d..35c1d127fc64 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -16,3 +16,12 @@ int vsr_get(struct task_struct *target, const struct user_regset *regset,
 int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	    unsigned int pos, unsigned int count,
 	    const void *kbuf, const void __user *ubuf);
+
+/* ptrace-altivec */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset);
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+	   unsigned int pos, unsigned int count,
+	   const void *kbuf, const void __user *ubuf);
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 621a0181f6f7..141dc0b8f502 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -417,130 +417,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
 	return ret;
 }
 
-#ifdef CONFIG_ALTIVEC
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword.  Quadwords 0-31 contain the
- * corresponding vector registers.  Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword.  Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface.  This allows signal handling and ptrace to use the
- * same structures.  This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-
-static int vr_active(struct task_struct *target,
-		     const struct user_regset *regset)
-{
-	flush_altivec_to_thread(target);
-	return target->thread.used_vr ? regset->n : 0;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	vector128	vr[32];
- *	vector128	vscr;
- *	vector128	vrsave;
- * };
- */
-static int vr_get(struct task_struct *target, const struct user_regset *regset,
-		  unsigned int pos, unsigned int count,
-		  void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	flush_altivec_to_thread(target);
-
-	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
-		     offsetof(struct thread_vr_state, vr[32]));
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.vr_state, 0,
-				  33 * sizeof(vector128));
-	if (!ret) {
-		/*
-		 * Copy out only the low-order word of vrsave.
-		 */
-		int start, end;
-		union {
-			elf_vrreg_t reg;
-			u32 word;
-		} vrsave;
-		memset(&vrsave, 0, sizeof(vrsave));
-
-		vrsave.word = target->thread.vrsave;
-
-		start = 33 * sizeof(vector128);
-		end = start + sizeof(vrsave);
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
-					  start, end);
-	}
-
-	return ret;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- *	vector128	vr[32];
- *	vector128	vscr;
- *	vector128	vrsave;
- * };
- */
-static int vr_set(struct task_struct *target, const struct user_regset *regset,
-		  unsigned int pos, unsigned int count,
-		  const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	flush_altivec_to_thread(target);
-
-	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
-		     offsetof(struct thread_vr_state, vr[32]));
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &target->thread.vr_state, 0,
-				 33 * sizeof(vector128));
-	if (!ret && count > 0) {
-		/*
-		 * We use only the first word of vrsave.
-		 */
-		int start, end;
-		union {
-			elf_vrreg_t reg;
-			u32 word;
-		} vrsave;
-		memset(&vrsave, 0, sizeof(vrsave));
-
-		vrsave.word = target->thread.vrsave;
-
-		start = 33 * sizeof(vector128);
-		end = start + sizeof(vrsave);
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
-					 start, end);
-		if (!ret)
-			target->thread.vrsave = vrsave.word;
-	}
-
-	return ret;
-}
-#endif /* CONFIG_ALTIVEC */
-
 #ifdef CONFIG_SPE
 
 /*
-- 
2.13.3