[PATCH 6/8] pinctrl: aspeed: Clarify comment about strapping W1C

From: Andrew Jeffery
Date: Wed Jun 26 2019 - 03:21:41 EST


Writes of 1 to SCU7C clear set bits in SCU70, the hardware strapping
register. The information was correct if you squinted while reading, but
hopefully switching the order of the registers as listed conveys it
better.

Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 4c775b8ffdc4..b510bb475851 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -209,7 +209,7 @@ static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP2)
continue;

- /* On AST2500, Set bits in SCU7C are cleared from SCU70 */
+ /* On AST2500, Set bits in SCU70 are cleared from SCU7C */
if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP1) {
unsigned int rev_id;

--
2.20.1