Re: [RFT][PATCH 1/2] regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg

[Dan Murphy]

Hello

On 6/26/19 8:26 AM, Axel Lin wrote:
> According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf
> Table 20. VPOS Bias Register Field Descriptions VPOS[5:0]
> Sets the Positive Display Bias (LDO) Voltage (50 mV per step)
> 000000: 4 V
> 000001: 4.05 V
> 000010: 4.1 V
> ....................
> 011101: 5.45 V
> 011110: 5.5 V (Default)
> 011111: 5.55 V
> ....................
> 100111: 5.95 V
> 101000: 6 V
> Note: Codes 101001 to 111111 map to 6 V
>
> The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage
> can match the datasheet.
>
> Fixes: 3a8d1a73a037 ("regulator: add LM363X driver")
> Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
> ---
>   drivers/regulator/lm363x-regulator.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
> index 5647e2f97ff8..e4a27d63bf90 100644
> --- a/drivers/regulator/lm363x-regulator.c
> +++ b/drivers/regulator/lm363x-regulator.c
> @@ -30,7 +30,7 @@
>   
>   /* LM3632 */
>   #define LM3632_BOOST_VSEL_MAX		0x26
> -#define LM3632_LDO_VSEL_MAX		0x29
> +#define LM3632_LDO_VSEL_MAX		0x28

Similar comment as I made on the LM36274

These are 0 based registers so it is 28 + 1

Dan


>   #define LM3632_VBOOST_MIN		4500000
>   #define LM3632_VLDO_MIN			4000000
>