Re: [PATCH v2 2/4] kbuild: do not create wrappers for header-test-y

[Jani Nikula]

On Thu, 27 Jun 2019, Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> wrote:
> header-test-y does not work with headers in sub-directories.
>
> For example, you can write a Makefile, like this:
>
> include/linux/Kbuild:
>
>   header-test-y += mtd/nand.h
>
> This entry creates a wrapper include/linux/mtd/nand.hdrtest.c with
> the following content:
>
>   #include "mtd/nand.h"
>
> To make this work, we need to add $(srctree)/include/linux to the
> header search path. It would be tedious to add ccflags-y.
>
> We could change the *.hdrtest.c rule to wrap:
>
>   #include "nand.h"
>
> This works for in-tree build since #include "..." searches in the
> relative path from the header with this directive. For O=... build,
> we need to add $(srctree)/include/linux/mtd to the header search path,
> which will be even more tedious.
>
> After all, I thought it would be handier to compile headers directly
> without creating wrappers.
>
> I added a new build rule to compile %.h into %.h.s
>
> I chose %.h.s instead of %.h.o because it was a little bit faster.
> Also, for GCC, an empty assembly is smaller than an empty object.
>
> I wrote the build rule:
>
>   $(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<
>
> instead of:
>
>   $(CC) $(c_flags) -S -o $@ -x c $<
>
> Both work fine with GCC, but the latter is not good for Clang.
>
> This comes down to the difference in the -Wunused-function policy.
> GCC does not warn about unused 'static inline' functions at all.
> Clang does not warn about the ones in included headers, but does
> about the ones in the source. So, we should handle headers as
> headers, not as source files.
>
> In fact, this has been hidden since commit abb2ea7dfd82 ("compiler,
> clang: suppress warning for unused static inline functions"), but we
> should not rely on that.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> ---
>
> Changes in v2:
>   - New patch
>
>  .gitignore                         |  1 -
>  Documentation/dontdiff             |  1 -
>  Documentation/kbuild/makefiles.txt |  3 +--
>  Makefile                           |  1 -
>  scripts/Makefile.build             | 10 +++++-----
>  scripts/Makefile.lib               |  2 +-
>  6 files changed, 7 insertions(+), 11 deletions(-)
>
> diff --git a/.gitignore b/.gitignore
> index 4bb60f0fa23b..7587ef56b92d 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -22,7 +22,6 @@
>  *.elf
>  *.gcno
>  *.gz
> -*.hdrtest.c
>  *.i
>  *.ko
>  *.lex.c
> diff --git a/Documentation/dontdiff b/Documentation/dontdiff
> index 554dfe4883d2..5eba889ea84d 100644
> --- a/Documentation/dontdiff
> +++ b/Documentation/dontdiff
> @@ -19,7 +19,6 @@
>  *.grep
>  *.grp
>  *.gz
> -*.hdrtest.c
>  *.html
>  *.i
>  *.jpeg
> diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
> index ca4b24ec0399..5080fec34609 100644
> --- a/Documentation/kbuild/makefiles.txt
> +++ b/Documentation/kbuild/makefiles.txt
> @@ -1023,8 +1023,7 @@ When kbuild executes, the following steps are followed (roughly):
>  	header-test-y specifies headers (*.h) in the current directory that
>  	should be compile tested to ensure they are self-contained,
>  	i.e. compilable as standalone units. If CONFIG_HEADER_TEST is enabled,
> -	this autogenerates dummy sources to include the headers, and builds them
> -	as part of extra-y.
> +	this builds them as part of extra-y.
>  
>  --- 6.7 Commands useful for building a boot image
>  
> diff --git a/Makefile b/Makefile
> index f23516980796..7f293b0431fe 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1648,7 +1648,6 @@ clean: $(clean-dirs)
>  		-o -name '*.dwo' -o -name '*.lst' \
>  		-o -name '*.su'  \
>  		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
> -		-o -name '*.hdrtest.c' \
>  		-o -name '*.lex.c' -o -name '*.tab.[ch]' \
>  		-o -name '*.asn1.[ch]' \
>  		-o -name '*.symtypes' -o -name 'modules.order' \
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index ee0319560513..776842b7e6a3 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -294,14 +294,14 @@ quiet_cmd_cc_lst_c = MKLST   $@
>  $(obj)/%.lst: $(src)/%.c FORCE
>  	$(call if_changed_dep,cc_lst_c)
>  
> -# Dummy C sources for header test (header-test-y target)
> +# header test (header-test-y target)
>  # ---------------------------------------------------------------------------
>  
> -quiet_cmd_header_test = HDRTEST $@
> -      cmd_header_test = echo "\#include \"$*.h\"" > $@
> +quiet_cmd_cc_s_h = CC      $@
> +      cmd_cc_s_h = $(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<

I think I'd prefer HDRTEST or something more informative than just CC in
the quiet cmd to distinguish this from the usual build lines. Especially
now that the file name is also just .h.s.

Other than that, good job getting rid of the intermediate file. I
couldn't figure it out when I did the original.

Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Tested-by: Jani Nikula <jani.nikula@xxxxxxxxx>

>  
> -$(obj)/%.hdrtest.c:
> -	$(call cmd,header_test)
> +$(obj)/%.h.s: $(src)/%.h FORCE
> +	$(call if_changed_dep,cc_s_h)
>  
>  # Compile assembler sources (.S)
>  # ---------------------------------------------------------------------------
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index 3e630fcaffd1..55ae1ec65342 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -67,7 +67,7 @@ extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
>  endif
>  
>  # Test self-contained headers
> -extra-$(CONFIG_HEADER_TEST) += $(patsubst %.h,%.hdrtest.o,$(header-test-y))
> +extra-$(CONFIG_HEADER_TEST) += $(addsuffix .s, $(header-test-y))
>  
>  # Add subdir path

-- 
Jani Nikula, Intel Open Source Graphics Center