[PATCH 1/2] ASoC: codecs: ad193x: Group register initialization at probe
From: Codrin Ciubotariu
Date: Thu Jun 27 2019 - 08:03:51 EST
Create a structure with the register initialization values at probe and
use it to initialize all the registers at once.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
---
The order of the initialization is changed, but it doesn't seem to
matter.
There is one checkpatch warning, let me know if you want to remove it:
WARNING: line over 80 characters
#32: FILE: sound/soc/codecs/ad193x.c:425:
+ { 0, 0x99 }, /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
sound/soc/codecs/ad193x.c | 52 +++++++++++++++++++++++++--------------
1 file changed, 33 insertions(+), 19 deletions(-)
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index 3ebc0524f4b2..f944228f014e 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -413,6 +413,38 @@ static struct snd_soc_dai_driver ad193x_no_adc_dai = {
.ops = &ad193x_dai_ops,
};
+struct ad193x_reg_default {
+ unsigned int reg;
+ unsigned int val;
+};
+
+/* codec register values to set after reset */
+static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
+{
+ const struct ad193x_reg_default reg_init[] = {
+ { 0, 0x99 }, /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
+ { 1, 0x04 }, /* PLL_CLK_CTRL1: no on-chip Vref */
+ { 2, 0x40 }, /* DAC_CTRL0: TDM mode */
+ { 4, 0x1A }, /* DAC_CTRL2: 48kHz de-emphasis, unmute dac */
+ { 5, 0x00 }, /* DAC_CHNL_MUTE: unmute DAC channels */
+ };
+ const struct ad193x_reg_default reg_adc_init[] = {
+ { 14, 0x03 }, /* ADC_CTRL0: high-pass filter enable */
+ { 15, 0x43 }, /* ADC_CTRL1: sata delay=1, adc aux mode */
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(reg_init); i++)
+ regmap_write(ad193x->regmap, reg_init[i].reg, reg_init[i].val);
+
+ if (ad193x_has_adc(ad193x)) {
+ for (i = 0; i < ARRAY_SIZE(reg_adc_init); i++) {
+ regmap_write(ad193x->regmap, reg_adc_init[i].reg,
+ reg_adc_init[i].val);
+ }
+ }
+}
+
static int ad193x_component_probe(struct snd_soc_component *component)
{
struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
@@ -420,25 +452,7 @@ static int ad193x_component_probe(struct snd_soc_component *component)
int num, ret;
/* default setting for ad193x */
-
- /* unmute dac channels */
- regmap_write(ad193x->regmap, AD193X_DAC_CHNL_MUTE, 0x0);
- /* de-emphasis: 48kHz, powedown dac */
- regmap_write(ad193x->regmap, AD193X_DAC_CTRL2, 0x1A);
- /* dac in tdm mode */
- regmap_write(ad193x->regmap, AD193X_DAC_CTRL0, 0x40);
-
- /* adc only */
- if (ad193x_has_adc(ad193x)) {
- /* high-pass filter enable */
- regmap_write(ad193x->regmap, AD193X_ADC_CTRL0, 0x3);
- /* sata delay=1, adc aux mode */
- regmap_write(ad193x->regmap, AD193X_ADC_CTRL1, 0x43);
- }
-
- /* pll input: mclki/xi */
- regmap_write(ad193x->regmap, AD193X_PLL_CLK_CTRL0, 0x99); /* mclk=24.576Mhz: 0x9D; mclk=12.288Mhz: 0x99 */
- regmap_write(ad193x->regmap, AD193X_PLL_CLK_CTRL1, 0x04);
+ ad193x_reg_default_init(ad193x);
/* adc only */
if (ad193x_has_adc(ad193x)) {
--
2.20.1