Re: [PATCH v4] mtd: spi-nor: fix nor->addr_width when its value configured from SFDP does not match the actual width
From: Vignesh Raghavendra
Date: Thu Jun 27 2019 - 09:22:54 EST
On 24/06/19 9:30 PM, Liu Xiang wrote:
> IS25LP256 gets BFPT_DWORD1_ADDRESS_BYTES_3_ONLY from BFPT table for
> address width. But in actual fact the flash can support 4-byte address.
> Use a post bfpt fixup hook to overwrite the address width advertised by
> the BFPT.
>
> Suggested-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> Signed-off-by: Liu Xiang <liu.xiang6@xxxxxxxxxx>
>
Reviewed-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Regards
Vignesh
> ---
>
> Changes in v4:
> update the comment suggested by Tudor.
> ---
> drivers/mtd/spi-nor/spi-nor.c | 25 ++++++++++++++++++++++++-
> 1 file changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 73172d7..ce153c4 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1687,6 +1687,28 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
> .flags = SPI_NOR_NO_FR | SPI_S3AN,
>
> static int
> +is25lp256_post_bfpt_fixups(struct spi_nor *nor,
> + const struct sfdp_parameter_header *bfpt_header,
> + const struct sfdp_bfpt *bfpt,
> + struct spi_nor_flash_parameter *params)
> +{
> + /*
> + * IS25LP256 supports 4B opcodes, but the BFPT advertises a
> + * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width.
> + * Overwrite the address width advertised by the BFPT.
> + */
> + if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
> + BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
> + nor->addr_width = 4;
> +
> + return 0;
> +}
> +
> +static struct spi_nor_fixups is25lp256_fixups = {
> + .post_bfpt = is25lp256_post_bfpt_fixups,
> +};
> +
> +static int
> mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
> const struct sfdp_parameter_header *bfpt_header,
> const struct sfdp_bfpt *bfpt,
> @@ -1827,7 +1849,8 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
> SECT_4K | SPI_NOR_DUAL_READ) },
> { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512,
> SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> - SPI_NOR_4B_OPCODES) },
> + SPI_NOR_4B_OPCODES)
> + .fixups = &is25lp256_fixups },
> { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
> SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
>
--
Regards
Vignesh