[PATCH V3 2/5] cpufreq: Don't skip frequency validation for has_target() drivers

From: Viresh Kumar
Date: Fri Jun 28 2019 - 01:17:07 EST


CPUFREQ_CONST_LOOPS was introduced in a very old commit from pre-2.6
kernel release by commit 6a4a93f9c0d5 ("[CPUFREQ] Fix 'out of sync'
issue").

If we you look at that commit, it does two things:

- It adds the frequency verification code (which is quite similar to
what we have today as well).

- And it sets the CPUFREQ_CONST_LOOPS flag only for setpolicy drivers,
rightly so based on the code we had then. The idea was to avoid
frequency validation for setpolicy drivers as the cpufreq core doesn't
know what frequency the hardware is running at and so no point in
doing frequency verification.

The problem happened when we started to use the same CPUFREQ_CONST_LOOPS
flag for constant loops-per-jiffy thing as well and many has_target()
drivers started using the same flag and unknowingly skipped the
verification of frequency. There is no logical reason behind skipping
frequency validation because of the presence of CPUFREQ_CONST_LOOPS
flag otherwise.

This patch fixes this issue by skipping frequency validation only for
setpolicy drivers and always doing it for has_target() drivers
irrespective of the presence or absence of CPUFREQ_CONST_LOOPS flag.

cpufreq_notify_transition() is only called for has_target() type driver
and not for set_policy type, and the check is simply redundant. Remove
it as well.

Also remove () around freq comparison statement as they aren't required
and checkpatch also warns for them.

Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
V2->V3:
- Updated commit log and $subject.

drivers/cpufreq/cpufreq.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 54befd775bd6..41ac701e324f 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -359,12 +359,10 @@ static void cpufreq_notify_transition(struct cpufreq_policy *policy,
* which is not equal to what the cpufreq core thinks is
* "old frequency".
*/
- if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- if (policy->cur && (policy->cur != freqs->old)) {
- pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
- freqs->old, policy->cur);
- freqs->old = policy->cur;
- }
+ if (policy->cur && policy->cur != freqs->old) {
+ pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
+ freqs->old, policy->cur);
+ freqs->old = policy->cur;
}

srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
@@ -1618,8 +1616,7 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
if (policy->fast_switch_enabled)
return ret_freq;

- if (ret_freq && policy->cur &&
- !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+ if (has_target() && ret_freq && policy->cur) {
/* verify no discrepancy between actual and
saved value exists */
if (unlikely(ret_freq != policy->cur)) {
--
2.21.0.rc0.269.g1a574e7a288b