Re: [PATCH v2] Documentation:sh:convert register-banks.txt and new-machine.txt to rst format.

[Vandana BN]

On 28/06/19 7:09 PM, Mauro Carvalho Chehab wrote:
> Em Fri, 28 Jun 2019 18:54:59 +0530
> Vandana BN <bnvandana@xxxxxxxxx> escreveu:
>
>> This patch converts new-machine.txt and register-banks.txt to ReST format, No content
>> change.
>> Added new-machine.rst and register-banks.rst to sh/index.rst
>>
>> Signed-off-by: Vandana BN <bnvandana@xxxxxxxxx>
>> ---
>>  Documentation/sh/index.rst                    |   6 +
>>  .../sh/{new-machine.txt => new-machine.rst}   | 171 +++++++++---------
>>  ...{register-banks.txt => register-banks.rst} |   8 +-
>>  3 files changed, 100 insertions(+), 85 deletions(-)
>>  rename Documentation/sh/{new-machine.txt => new-machine.rst} (79%)
>>  rename Documentation/sh/{register-banks.txt => register-banks.rst} (90%)
>>
>> diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
>> index bc8db7ba894a..25471d3fc294 100644
>> --- a/Documentation/sh/index.rst
>> +++ b/Documentation/sh/index.rst
>> @@ -57,3 +57,9 @@ Maple
>>
>>  .. kernel-doc:: drivers/sh/maple/maple.c
>>     :export:
>> +
>> +.. toctree::
>> +   :maxdepth: 2
>> +
>> +   new-machine
>> +   register-banks
> Hmm... adding a toctree at the end doesn't seem the best thing to do.
>
> Adding it at the beginning (just after the title) would be a little
> better, but IMHO, moving the kernel-doc markups to another file
> would make it to look better.
>
> The remaining patch looks ok on my eyes.

Thanks Mauro,Â

will create a new interfaces.rst file to move the kernel-doc markups. and have index.rst to have toctree .

Will send a patch with these changes.

>
>> diff --git a/Documentation/sh/new-machine.txt b/Documentation/sh/new-machine.rst
>> similarity index 79%
>> rename from Documentation/sh/new-machine.txt
>> rename to Documentation/sh/new-machine.rst
>> index e0961a66130b..b16c33342642 100644
>> --- a/Documentation/sh/new-machine.txt
>> +++ b/Documentation/sh/new-machine.rst
>> @@ -1,8 +1,8 @@
>> +================================
>> +Adding a new board to LinuxSH
>> +================================
>>
>> -                Adding a new board to LinuxSH
>> -               ================================
>> -
>> -               Paul Mundt <lethal@xxxxxxxxxxxx>
>> +Paul Mundt <lethal@xxxxxxxxxxxx>
>>
>>  This document attempts to outline what steps are necessary to add support
>>  for new boards to the LinuxSH port under the new 2.5 and 2.6 kernels. This
>> @@ -19,65 +19,67 @@ include/asm-sh/. For the new kernel, things are broken out by board type,
>>  companion chip type, and CPU type. Looking at a tree view of this directory
>>  hierarchy looks like the following:
>>
>> -Board-specific code:
>> -
>> -.
>> -|-- arch
>> -|   `-- sh
>> -|       `-- boards
>> -|           |-- adx
>> -|           |   `-- board-specific files
>> -|           |-- bigsur
>> -|           |   `-- board-specific files
>> -|           |
>> -|           ... more boards here ...
>> -|
>> -`-- include
>> -    `-- asm-sh
>> -        |-- adx
>> -        |   `-- board-specific headers
>> -        |-- bigsur
>> -        |   `-- board-specific headers
>> -        |
>> -	.. more boards here ...
>> -
>> -Next, for companion chips:
>> -.
>> -`-- arch
>> -    `-- sh
>> -        `-- cchips
>> -            `-- hd6446x
>> -                `-- hd64461
>> -                    `-- cchip-specific files
>> +Board-specific code::
>> +
>> + .
>> + |-- arch
>> + |   `-- sh
>> + |       `-- boards
>> + |           |-- adx
>> + |           |   `-- board-specific files
>> + |           |-- bigsur
>> + |           |   `-- board-specific files
>> + |           |
>> + |           ... more boards here ...
>> + |
>> + `-- include
>> +     `-- asm-sh
>> +         |-- adx
>> +         |   `-- board-specific headers
>> +         |-- bigsur
>> +         |   `-- board-specific headers
>> +         |
>> +       	 .. more boards here ...
>> +
>> +Next, for companion chips::
>> +
>> + .
>> + `-- arch
>> +     `-- sh
>> +         `-- cchips
>> +             `-- hd6446x
>> +                 `-- hd64461
>> +                     `-- cchip-specific files
>>
>>  ... and so on. Headers for the companion chips are treated the same way as
>>  board-specific headers. Thus, include/asm-sh/hd64461 is home to all of the
>>  hd64461-specific headers.
>>
>> -Finally, CPU family support is also abstracted:
>> -.
>> -|-- arch
>> -|   `-- sh
>> -|       |-- kernel
>> -|       |   `-- cpu
>> -|       |       |-- sh2
>> -|       |       |   `-- SH-2 generic files
>> -|       |       |-- sh3
>> -|       |       |   `-- SH-3 generic files
>> -|       |       `-- sh4
>> -|       |           `-- SH-4 generic files
>> -|       `-- mm
>> -|           `-- This is also broken out per CPU family, so each family can
>> -|               have their own set of cache/tlb functions.
>> -|
>> -`-- include
>> -    `-- asm-sh
>> -        |-- cpu-sh2
>> -        |   `-- SH-2 specific headers
>> -        |-- cpu-sh3
>> -        |   `-- SH-3 specific headers
>> -        `-- cpu-sh4
>> -            `-- SH-4 specific headers
>> +Finally, CPU family support is also abstracted::
>> +
>> + .
>> + |-- arch
>> + |   `-- sh
>> + |       |-- kernel
>> + |       |   `-- cpu
>> + |       |       |-- sh2
>> + |       |       |   `-- SH-2 generic files
>> + |       |       |-- sh3
>> + |       |       |   `-- SH-3 generic files
>> + |       |       `-- sh4
>> + |       |           `-- SH-4 generic files
>> + |       `-- mm
>> + |           `-- This is also broken out per CPU family, so each family can
>> + |               have their own set of cache/tlb functions.
>> + |
>> + `-- include
>> +     `-- asm-sh
>> +         |-- cpu-sh2
>> +         |   `-- SH-2 specific headers
>> +         |-- cpu-sh3
>> +         |   `-- SH-3 specific headers
>> +         `-- cpu-sh4
>> +             `-- SH-4 specific headers
>>
>>  It should be noted that CPU subtypes are _not_ abstracted. Thus, these still
>>  need to be dealt with by the CPU family specific code.
>> @@ -112,18 +114,20 @@ setup code, we're required at the very least to provide definitions for
>>  get_system_type() and platform_setup(). For our imaginary board, this
>>  might look something like:
>>
>> -/*
>> - * arch/sh/boards/vapor/setup.c - Setup code for imaginary board
>> - */
>> -#include <linux/init.h>
>> +.. code-block:: c
>> +
>> +    /*
>> +     * arch/sh/boards/vapor/setup.c - Setup code for imaginary board
>> +     */
>> +    #include <linux/init.h>
>>
>> -const char *get_system_type(void)
>> -{
>> -	return "FooTech Vaporboard";
>> -}
>> +    const char *get_system_type(void)
>> +    {
>> +        return "FooTech Vaporboard";
>> +    }
>>
>> -int __init platform_setup(void)
>> -{
>> +    int __init platform_setup(void)
>> +    {
>>    	/*
>>  	 * If our hardware actually existed, we would do real
>>  	 * setup here. Though it's also sane to leave this empty
>> @@ -136,7 +140,8 @@ int __init platform_setup(void)
>>  	/* And whatever else ... */
>>
>>  	return 0;
>> -}
>> +    }
>> +
>>
>>  Our new imaginary board will also have to tie into the machvec in order for it
>>  to be of any use.
>> @@ -172,16 +177,17 @@ sufficient.
>>     vector.
>>
>>     Note that these prototypes are generated automatically by setting
>> -   __IO_PREFIX to something sensible. A typical example would be:
>> +   __IO_PREFIX to something sensible. A typical example would be::
>>
>>  	#define __IO_PREFIX vapor
>>     	#include <asm/io_generic.h>
>>
>> +
>>     somewhere in the board-specific header. Any boards being ported that still
>>     have a legacy io.h should remove it entirely and switch to the new model.
>>
>>   - Add machine vector definitions to the board's setup.c. At a bare minimum,
>> -   this must be defined as something like:
>> +   this must be defined as something like::
>>
>>  	struct sh_machine_vector mv_vapor __initmv = {
>>  		.mv_name = "vapor",
>> @@ -202,11 +208,11 @@ Large portions of the build system are now entirely dynamic, and merely
>>  require the proper entry here and there in order to get things done.
>>
>>  The first thing to do is to add an entry to arch/sh/Kconfig, under the
>> -"System type" menu:
>> +"System type" menu::
>>
>> -config SH_VAPOR
>> -	bool "Vapor"
>> -	help
>> + config SH_VAPOR
>> +	 bool "Vapor"
>> +	 help
>>  	  select Vapor if configuring for a FooTech Vaporboard.
>>
>>  next, this has to be added into arch/sh/Makefile. All boards require a
>> @@ -232,6 +238,8 @@ space restating it here. After this is done, you will be able to use
>>  implicit checks for your board if you need this somewhere throughout the
>>  common code, such as:
>>
>> +::
>> +
>>  	/* Make sure we're on the FooTech Vaporboard */
>>  	if (!mach_is_vapor())
>>  		return -ENODEV;
>> @@ -253,12 +261,13 @@ build target, and it will be implicitly listed as such in the help text.
>>  Looking at the 'make help' output, you should now see something like:
>>
>>  Architecture specific targets (sh):
>> -  zImage                  - Compressed kernel image (arch/sh/boot/zImage)
>> -  adx_defconfig           - Build for adx
>> -  cqreek_defconfig        - Build for cqreek
>> -  dreamcast_defconfig     - Build for dreamcast
>> -...
>> -  vapor_defconfig         - Build for vapor
>> +
>> + - zImage                  - Compressed kernel image (arch/sh/boot/zImage)
>> + - adx_defconfig           - Build for adx
>> + - cqreek_defconfig        - Build for cqreek
>> + - dreamcast_defconfig     - Build for dreamcast
>> + - ...
>> + - vapor_defconfig         - Build for vapor
>>
>>  which then allows you to do:
>>
>> diff --git a/Documentation/sh/register-banks.txt b/Documentation/sh/register-banks.rst
>> similarity index 90%
>> rename from Documentation/sh/register-banks.txt
>> rename to Documentation/sh/register-banks.rst
>> index a6719f2f6594..acccfaf80355 100644
>> --- a/Documentation/sh/register-banks.txt
>> +++ b/Documentation/sh/register-banks.rst
>> @@ -1,8 +1,9 @@
>> -	Notes on register bank usage in the kernel
>> -	==========================================
>> +==========================================
>> +Notes on register bank usage in the kernel
>> +==========================================
>>
>>  Introduction
>> -------------
>> +============
>>
>>  The SH-3 and SH-4 CPU families traditionally include a single partial register
>>  bank (selected by SR.RB, only r0 ... r7 are banked), whereas other families
>> @@ -30,4 +31,3 @@ Presently the kernel uses several of these registers.
>>  		- The SR.IMASK interrupt handler makes use of this to set the
>>  		  interrupt priority level (used by local_irq_enable())
>>  	- r7_bank (current)
>> -
>> --
>> 2.17.1
>>
>
>
> Thanks,
> Mauro

Regards,

Vandana.