[RFC PATCH v2 05/12] powerpc/ptrace: split out ALTIVEC related functions.

From: Christophe Leroy
Date: Fri Jun 28 2019 - 11:48:32 EST


Move CONFIG_ALTIVEC functions out of ptrace.c, into
ptrace-altivec.c

Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
---
arch/powerpc/kernel/ptrace/Makefile | 1 +
arch/powerpc/kernel/ptrace/ptrace-altivec.c | 151 ++++++++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace-decl.h | 9 ++
arch/powerpc/kernel/ptrace/ptrace.c | 124 -----------------------
4 files changed, 161 insertions(+), 124 deletions(-)
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-altivec.c

diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index 238c27189078..522e6fd0b5b8 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_VSX) += ptrace-vsx.o
ifneq ($(CONFIG_VSX),y)
obj-y += ptrace-novsx.o
endif
+obj-$(CONFIG_ALTIVEC) += ptrace-altivec.o
diff --git a/arch/powerpc/kernel/ptrace/ptrace-altivec.c b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
new file mode 100644
index 000000000000..0cb749164269
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword. Quadwords 0-31 contain the
+ * corresponding vector registers. Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword. Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface. This allows signal handling and ptrace to use the
+ * same structures. This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ flush_altivec_to_thread(target);
+ return target->thread.used_vr ? regset->n : 0;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ * };
+ */
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ flush_altivec_to_thread(target);
+
+ BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+ offsetof(struct thread_vr_state, vr[32]));
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.vr_state, 0,
+ 33 * sizeof(vector128));
+ if (!ret) {
+ /*
+ * Copy out only the low-order word of vrsave.
+ */
+ int start, end;
+ union {
+ elf_vrreg_t reg;
+ u32 word;
+ } vrsave;
+ memset(&vrsave, 0, sizeof(vrsave));
+
+ vrsave.word = target->thread.vrsave;
+
+ start = 33 * sizeof(vector128);
+ end = start + sizeof(vrsave);
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
+ start, end);
+ }
+
+ return ret;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ * };
+ */
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ flush_altivec_to_thread(target);
+
+ BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+ offsetof(struct thread_vr_state, vr[32]));
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.vr_state, 0,
+ 33 * sizeof(vector128));
+ if (!ret && count > 0) {
+ /*
+ * We use only the first word of vrsave.
+ */
+ int start, end;
+ union {
+ elf_vrreg_t reg;
+ u32 word;
+ } vrsave;
+ memset(&vrsave, 0, sizeof(vrsave));
+
+ vrsave.word = target->thread.vrsave;
+
+ start = 33 * sizeof(vector128);
+ end = start + sizeof(vrsave);
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
+ start, end);
+ if (!ret)
+ target->thread.vrsave = vrsave.word;
+ }
+
+ return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index 764df4ee9362..0f9282cb52fc 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -17,6 +17,15 @@ int vsr_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf);

+/* ptrace-altivec */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset);
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+
/* ptrace */

#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 3d0a0b8f8c07..198ccbfce544 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -415,130 +415,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
return ret;
}

-#ifdef CONFIG_ALTIVEC
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword. Quadwords 0-31 contain the
- * corresponding vector registers. Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword. Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface. This allows signal handling and ptrace to use the
- * same structures. This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-
-static int vr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- flush_altivec_to_thread(target);
- return target->thread.used_vr ? regset->n : 0;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * vector128 vr[32];
- * vector128 vscr;
- * vector128 vrsave;
- * };
- */
-static int vr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- flush_altivec_to_thread(target);
-
- BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
- offsetof(struct thread_vr_state, vr[32]));
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
- 33 * sizeof(vector128));
- if (!ret) {
- /*
- * Copy out only the low-order word of vrsave.
- */
- int start, end;
- union {
- elf_vrreg_t reg;
- u32 word;
- } vrsave;
- memset(&vrsave, 0, sizeof(vrsave));
-
- vrsave.word = target->thread.vrsave;
-
- start = 33 * sizeof(vector128);
- end = start + sizeof(vrsave);
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
- start, end);
- }
-
- return ret;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * vector128 vr[32];
- * vector128 vscr;
- * vector128 vrsave;
- * };
- */
-static int vr_set(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- flush_altivec_to_thread(target);
-
- BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
- offsetof(struct thread_vr_state, vr[32]));
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
- 33 * sizeof(vector128));
- if (!ret && count > 0) {
- /*
- * We use only the first word of vrsave.
- */
- int start, end;
- union {
- elf_vrreg_t reg;
- u32 word;
- } vrsave;
- memset(&vrsave, 0, sizeof(vrsave));
-
- vrsave.word = target->thread.vrsave;
-
- start = 33 * sizeof(vector128);
- end = start + sizeof(vrsave);
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
- start, end);
- if (!ret)
- target->thread.vrsave = vrsave.word;
- }
-
- return ret;
-}
-#endif /* CONFIG_ALTIVEC */
-
#ifdef CONFIG_SPE

/*
--
2.13.3