Re: [PATCH V5 13/18] soc/tegra: pmc: Add pmc wake support for tegra210
From: Dmitry Osipenko
Date: Sat Jun 29 2019 - 09:11:30 EST
28.06.2019 5:12, Sowjanya Komatineni ÐÐÑÐÑ:
> This patch implements PMC wakeup sequence for Tegra210 and defines
> common used RTC alarm wake event.
>
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
> drivers/soc/tegra/pmc.c | 111 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 111 insertions(+)
>
> diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
> index 91c84d0e66ae..194100d77243 100644
> --- a/drivers/soc/tegra/pmc.c
> +++ b/drivers/soc/tegra/pmc.c
> @@ -57,6 +57,12 @@
> #define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */
> #define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */
> #define PMC_CNTRL_MAIN_RST BIT(4)
> +#define PMC_CNTRL_LATCH_WAKEUPS BIT(5)
> +
> +#define PMC_WAKE_MASK 0x0c
> +#define PMC_WAKE_LEVEL 0x10
> +#define PMC_WAKE_STATUS 0x14
> +#define PMC_SW_WAKE_STATUS 0x18
>
> #define DPD_SAMPLE 0x020
> #define DPD_SAMPLE_ENABLE BIT(0)
> @@ -87,6 +93,11 @@
>
> #define PMC_SCRATCH41 0x140
>
> +#define PMC_WAKE2_MASK 0x160
> +#define PMC_WAKE2_LEVEL 0x164
> +#define PMC_WAKE2_STATUS 0x168
> +#define PMC_SW_WAKE2_STATUS 0x16c
> +
> #define PMC_SENSOR_CTRL 0x1b0
> #define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2)
> #define PMC_SENSOR_CTRL_ENABLE_RST BIT(1)
> @@ -1922,6 +1933,55 @@ static const struct irq_domain_ops tegra_pmc_irq_domain_ops = {
> .alloc = tegra_pmc_irq_alloc,
> };
>
> +static int tegra210_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
> +{
> + struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data);
> + unsigned int offset, bit;
> + u32 value;
> +
> + if (data->hwirq == ULONG_MAX)
> + return 0;
> +
> + offset = data->hwirq / 32;
> + bit = data->hwirq % 32;
> +
> + /*
> + * latch wakeups to SW_WAKE_STATUS register to capture events
> + * that would not make it into wakeup event register during LP0 exit.
> + */
Minor nit: start multi-line comments with a capital letter.