Re: [PATCH] rt2x00: fix rx queue hang

[Stanislaw Gruszka]

On Mon, Jul 01, 2019 at 12:49:50PM +0200, Soeren Moch wrote:
> Hello!
> 
> On 29.06.19 10:50, Stanislaw Gruszka wrote:
> > Hello
> >
> > On Wed, Jun 26, 2019 at 03:28:00PM +0200, Soeren Moch wrote:
> >> Hi Stanislaw,
> >>
> >> the good news is: your patch below also solves the issue for me. But
> >> removing the ENTRY_DATA_STATUS_PENDING check in
> >> rt2x00usb_kick_rx_entry() alone does not help, while removing this check
> >> in rt2x00usb_work_rxdone() alone does the trick.
> >>
> >> So the real race seems to be that the flags set in the completion
> >> handler are not yet visible on the cpu core running the workqueue. And
> >> because the worker is not rescheduled when aborted, the entry can just
> >> wait forever.
> >> Do you think this could make sense?
> > Yes.
> >
> >>> I'm somewhat reluctant to change the order, because TX processing
> >>> might relay on it (we first mark we wait for TX status and
> >>> then mark entry is no longer owned by hardware).
> >> OK, maybe it's just good luck that changing the order solves the rx
> >> problem. Or can memory barriers associated with the spinlock in
> >> rt2x00lib_dmadone() be responsible for that?
> >> (I'm testing on a armv7 system, Cortex-A9 quadcore.)
> > I'm not sure, rt2x00queue_index_inc() also disable/enable interrupts,
> > so maybe that make race not reproducible. 
> I tested some more, the race is between setting ENTRY_DATA_IO_FAILED (if
> needed) and enabling workqueue processing. This enabling was done via
> ENTRY_DATA_STATUS_PENDING in my patch. So setting
> ENTRY_DATA_STATUS_PENDING behind the spinlock in
> rt2x00lib_dmadone()/rt2x00queue_index_inc() moved this very close to
> setting of ENTRY_DATA_IO_FAILED (if needed). While still in the wrong
> order, this made it very unlikely for the race to show up.
> >
> >> While looking at it, why we double-clear ENTRY_OWNER_DEVICE_DATA in
> >> rt2x00usb_interrupt_rxdone() directly and in rt2x00lib_dmadone() again,
> > rt2x00lib_dmadone() is called also on other palaces (error paths)
> > when we have to clear flags.
> Yes, but also clearing ENTRY_OWNER_DEVICE_DATA in
> rt2x00usb_interrupt_rxdone() directly is not necessary and can lead to
> the wrong processing order.
> >>  while not doing the same for tx? 
> > If I remember correctly we have some races on rx (not happened on tx)
> > that was solved by using test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA).
> I searched in the history, it actually was the other way around. You
> changed test_and_clear_bit() to test_bit() in the TX path. I think this
> is also the right way to go in RX.
> >> Would it make more sense to possibly
> >> set ENTRY_DATA_IO_FAILED before clearing ENTRY_OWNER_DEVICE_DATA in
> >> rt2x00usb_interrupt_rxdone() as for tx?
> > I don't think so, ENTRY_DATA_IO_FAILED should be only set on error
> > case.
> 
> Yes of course. But if the error occurs, it should be signalled before
> enabling the workqueue processing, see the race described above.
> 
> After some more testing I'm convinced that this would be the right fix
> for this problem. I will send a v2 of this patch accordingly.

Great, now I understand the problem. Thank you very much!

Stanislaw