[PATCH 3/3] net: phy: realtek: Support SSC for the RTL8211E
From: Matthias Kaehlcke
Date: Mon Jul 01 2019 - 15:52:44 EST
By default Spread-Spectrum Clocking (SSC) is disabled on the RTL8211E.
Enable it if the device tree property 'realtek,enable-ssc' exists.
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
drivers/net/phy/realtek.c | 27 ++++++++++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index dfc2e20ef335..b617169ccc8c 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -9,8 +9,10 @@
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*/
#include <linux/bitops.h>
-#include <linux/phy.h>
+#include <linux/device.h>
+#include <linux/of.h>
#include <linux/module.h>
+#include <linux/phy.h>
#define RTL821x_PHYSR 0x11
#define RTL821x_PHYSR_DUPLEX BIT(13)
@@ -28,6 +30,8 @@
#define RTL8211E_EXT_PAGE 7
#define RTL8211E_EPAGSR 0x1e
+#define RTL8211E_SCR 0x1a
+#define RTL8211E_SCR_DISABLE_RXC_SSC BIT(2)
#define RTL8211F_INSR 0x1d
@@ -87,8 +91,8 @@ static int rtl821e_restore_page(struct phy_device *phydev, int oldpage, int ret)
return ret;
}
-static int __maybe_unused rtl8211e_modify_ext_paged(struct phy_device *phydev,
- int page, u32 regnum, u16 mask, u16 set)
+static int rtl8211e_modify_ext_paged(struct phy_device *phydev, int page,
+ u32 regnum, u16 mask, u16 set)
{
int ret = 0;
int oldpage;
@@ -114,6 +118,22 @@ static int __maybe_unused rtl8211e_modify_ext_paged(struct phy_device *phydev,
return rtl821e_restore_page(phydev, oldpage, ret);
}
+static int rtl8211e_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ int err;
+
+ if (of_property_read_bool(dev->of_node, "realtek,enable-ssc")) {
+ err = rtl8211e_modify_ext_paged(phydev, 0xa0, RTL8211E_SCR,
+ RTL8211E_SCR_DISABLE_RXC_SSC,
+ 0);
+ if (err)
+ dev_err(dev, "failed to enable SSC on RXC: %d\n", err);
+ }
+
+ return 0;
+}
+
static int rtl8201_ack_interrupt(struct phy_device *phydev)
{
int err;
@@ -372,6 +392,7 @@ static struct phy_driver realtek_drvs[] = {
.config_init = &rtl8211e_config_init,
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211e_config_intr,
+ .probe = rtl8211e_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
--
2.22.0.410.gd8fdbe21b5-goog