[PATCH 1/2] serial/8250: Add support for NI-Serial PXI/PXIe+485 devices.
From: jeyentam
Date: Mon Jul 01 2019 - 23:35:06 EST
Add support for NI-Serial PXIe-RS232, PXI-RS485 and PXIe-RS485 devices.
Signed-off-by: jeyentam <je.yen.tam@xxxxxx>
---
drivers/tty/serial/8250/8250_pci.c | 879 +++++++++++++++++++----------
1 file changed, 582 insertions(+), 297 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index df41397de478..0a711b895b33 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Probe module for 8250/16550-type PCI serial ports.
+ * Probe module for 8250/16550-type PCI serial ports.
*
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
- * Copyright (C) 2001 Russell King, All Rights Reserved.
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
*/
#undef DEBUG
#include <linux/module.h>
@@ -26,9 +26,9 @@
/*
* init function returns:
- * > 0 - number of ports
- * = 0 - use board->num_ports
- * < 0 - error
+ * > 0 - number of ports
+ * = 0 - use board->num_ports
+ * < 0 - error
*/
struct pci_serial_quirk {
u32 vendor;
@@ -59,13 +59,13 @@ static int pci_default_setup(struct serial_private*,
static void moan_device(const char *str, struct pci_dev *dev)
{
dev_err(&dev->dev,
- "%s: %s\n"
- "Please send the output of lspci -vv, this\n"
- "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
- "manufacturer and name of serial board or\n"
- "modem board to <linux-serial@xxxxxxxxxxxxxxx>.\n",
- pci_name(dev), str, dev->vendor, dev->device,
- dev->subsystem_vendor, dev->subsystem_device);
+ "%s: %s\n"
+ "Please send the output of lspci -vv, this\n"
+ "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+ "manufacturer and name of serial board or\n"
+ "modem board to <linux-serial@xxxxxxxxxxxxxxx>.\n",
+ pci_name(dev), str, dev->vendor, dev->device,
+ dev->subsystem_vendor, dev->subsystem_device);
}
static int
@@ -128,7 +128,7 @@ static int addidata_apci7800_setup(struct serial_private *priv,
*/
static int
afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -144,9 +144,9 @@ afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
}
/*
- * HP's Remote Management Console. The Diva chip came in several
- * different versions. N-class, L2000 and A500 have two Diva chips, each
- * with 3 UARTs (the third UART on the second chip is unused). Superdome
+ * HP's Remote Management Console. The Diva chip came in several
+ * different versions. N-class, L2000 and A500 have two Diva chips, each
+ * with 3 UARTs (the third UART on the second chip is unused). Superdome
* and Keystone have one Diva chip with 3 UARTs. Some later machines have
* one Diva chip, but it has been expanded to 5 UARTs.
*/
@@ -245,11 +245,11 @@ static int pci_plx9050_init(struct pci_dev *dev)
irq_config = 0x41;
if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
- dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
+ dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
irq_config = 0x43;
if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
- (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
+ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
/*
* As the megawolf cards have the int pins active
* high, and have 2 UART chips, both ints must be
@@ -317,7 +317,7 @@ static void pci_ni8420_exit(struct pci_dev *dev)
/* Disable the CPU Interrupt */
writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT),
- p + NI8420_INT_ENABLE_REG);
+ p + NI8420_INT_ENABLE_REG);
iounmap(p);
}
@@ -426,15 +426,15 @@ static void sbs_exit(struct pci_dev *dev)
* hope) because it doesn't touch EEPROM settings to prevent conflicts
* with other OSes (like M$ DOS).
*
- * SIIG support added by Andrey Panin <pazke@xxxxxxxxx>, 10/1999
+ * SIIG support added by Andrey Panin <pazke@xxxxxxxxx>, 10/1999
*
* There is two family of SIIG serial cards with different PCI
* interface chip and different configuration methods:
- * - 10x cards have control registers in IO and/or memory space;
- * - 20x cards have control registers in standard PCI configuration space.
+ * - 10x cards have control registers in IO and/or memory space;
+ * - 20x cards have control registers in standard PCI configuration space.
*
* Note: all 10x cards have PCI device ids 0x10..
- * all 20x cards have PCI device ids 0x20..
+ * all 20x cards have PCI device ids 0x20..
*
* There are also Quartet Serial cards which use Oxford Semiconductor
* 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
@@ -485,7 +485,7 @@ static int pci_siig20x_init(struct pci_dev *dev)
/* If this card has 2 UART, we have to do the same with second UART. */
if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
- ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
+ ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
pci_read_config_byte(dev, 0x73, &data);
pci_write_config_byte(dev, 0x73, data & 0xef);
}
@@ -559,9 +559,9 @@ static const struct timedia_struct {
};
/*
- * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
+ * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
* listing them individually, this driver merely grabs them all with
- * PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
+ * PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
* and should be left free to be claimed by parport_serial instead.
*/
static int pci_timedia_probe(struct pci_dev *dev)
@@ -634,8 +634,8 @@ pci_timedia_setup(struct serial_private *priv,
*/
static int
titan_400l_800l_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -676,7 +676,7 @@ static int pci_ni8420_init(struct pci_dev *dev)
/* Enable CPU Interrupt */
writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT,
- p + NI8420_INT_ENABLE_REG);
+ p + NI8420_INT_ENABLE_REG);
iounmap(p);
return 0;
@@ -717,7 +717,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
/* Set window access to go to RAMSEL IO address space */
writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK),
- p + MITE_IOWCR1);
+ p + MITE_IOWCR1);
/* Enable IO Bus Interrupt 0 */
writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1);
@@ -730,8 +730,16 @@ static int pci_ni8430_init(struct pci_dev *dev)
}
/* UART Port Control Register */
-#define NI8430_PORTCON 0x0f
-#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
+#define NI16550_PCR_OFFSET 0x0f
+#define NI16550_PCR_RS422 0x00
+#define NI16550_PCR_ECHO_RS485 0x01
+#define NI16550_PCR_DTR_RS485 0x02
+#define NI16550_PCR_AUTO_RS485 0x03
+#define NI16550_PCR_WIRE_MODE_MASK 0x03
+#define NI16550_PCR_TXVR_ENABLE_BIT (1 << 3)
+#define NI16550_PCR_RS485_TERMINATION_BIT (1 << 6)
+#define NI16550_ACR_DTR_AUTO_DTR (0x2 << 3)
+#define NI16550_ACR_DTR_MANUAL_DTR (0x0 << 3)
static int
pci_ni8430_setup(struct serial_private *priv,
@@ -753,14 +761,127 @@ pci_ni8430_setup(struct serial_private *priv,
return -ENOMEM;
/* enable the transceiver */
- writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
- p + offset + NI8430_PORTCON);
+ writeb(readb(p + offset + NI16550_PCR_OFFSET) |
+ NI16550_PCR_TXVR_ENABLE_BIT,
+ p + offset + NI16550_PCR_OFFSET);
iounmap(p);
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int pci_ni8431_config_rs485(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ u8 pcr, acr;
+
+ struct uart_8250_port *up;
+
+ up = container_of(port, struct uart_8250_port, port);
+
+ acr = up->acr;
+
+ dev_dbg(port->dev, "ni16550_config_rs485\n");
+
+ /* "rs485" should be given to us non-NULL. */
+ WARN_ON(rs485 == NULL);
+
+ pcr = port->serial_in(port, NI16550_PCR_OFFSET);
+ pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
+
+ if (rs485->flags & SER_RS485_ENABLED) {
+ /* RS-485 */
+ if ((rs485->flags & SER_RS485_RX_DURING_TX) &&
+ (rs485->flags & SER_RS485_RTS_ON_SEND)) {
+ dev_dbg(port->dev, "Invalid 2-wire mode\n");
+ return -EINVAL;
+ }
+
+ if (rs485->flags & SER_RS485_RX_DURING_TX) {
+ /* Echo */
+ dev_vdbg(port->dev, "2-wire DTR with echo\n");
+ pcr |= NI16550_PCR_ECHO_RS485;
+ acr |= NI16550_ACR_DTR_MANUAL_DTR;
+ } else {
+ /* Auto or DTR */
+ if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+ /* Auto */
+ dev_vdbg(port->dev, "2-wire Auto\n");
+ pcr |= NI16550_PCR_AUTO_RS485;
+ acr |= NI16550_ACR_DTR_AUTO_DTR;
+ } else {
+ /* DTR-controlled */
+ /* No Echo */
+ dev_vdbg(port->dev, "2-wire DTR no echo\n");
+ pcr |= NI16550_PCR_DTR_RS485;
+ acr |= NI16550_ACR_DTR_MANUAL_DTR;
+ }
+ }
+ } else {
+ /* RS-422 */
+ dev_vdbg(port->dev, "4-wire\n");
+ pcr |= NI16550_PCR_RS422;
+ acr |= NI16550_ACR_DTR_MANUAL_DTR;
+ }
+
+ dev_dbg(port->dev, "write pcr: 0x%08x\n", pcr);
+ port->serial_out(port, NI16550_PCR_OFFSET, pcr);
+
+ up->acr = acr;
+ port->serial_out(port, UART_SCR, UART_ACR);
+ port->serial_out(port, UART_ICR, up->acr);
+
+ /* Update the cache. */
+ port->rs485 = *rs485;
+
+ dev_dbg(port->dev, "ni16550_config_rs485\n");
+ return 0;
+}
+
+static int pci_ni8431_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *uart, int idx)
+{
+ u8 pcr, acr;
+ struct pci_dev *dev = priv->dev;
+ void __iomem *addr;
+ unsigned int bar, offset = board->first_offset;
+
+ if (idx >= board->num_ports)
+ return 1;
+
+ bar = FL_GET_BASE(board->flags);
+ offset += idx * board->uart_offset;
+
+ addr = pci_ioremap_bar(dev, bar);
+ if (!addr)
+ return -ENOMEM;
+
+ /* enable the transceiver */
+ writeb(readb(addr + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
+ addr + NI16550_PCR_OFFSET);
+
+ pcr = readb(addr + NI16550_PCR_OFFSET);
+ pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
+
+ /* set wire mode to default RS-422 */
+ pcr |= NI16550_PCR_RS422;
+ acr = NI16550_ACR_DTR_MANUAL_DTR;
+
+ /* write port configuration to register */
+ writeb(pcr, addr + NI16550_PCR_OFFSET);
+
+ /* access and write to UART acr register */
+ writeb(UART_ACR, addr + UART_SCR);
+ writeb(acr, addr + UART_ICR);
+
+ uart->port.rs485_config = &pci_ni8431_config_rs485;
+
+ iounmap(addr);
+
+ return setup_port(priv, uart, bar, offset, board->reg_shift);
+}
+
static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -768,7 +889,7 @@ static int pci_netmos_9900_setup(struct serial_private *priv,
unsigned int bar;
if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) &&
- (priv->dev->subsystem_device & 0xff00) == 0x3000) {
+ (priv->dev->subsystem_device & 0xff00) == 0x3000) {
/* netmos apparently orders BARs by datasheet layout, so serial
* ports get BARs 0 and 3 (or 1 and 4 for memmapped)
*/
@@ -784,7 +905,7 @@ static int pci_netmos_9900_setup(struct serial_private *priv,
* of capabilities:
*
* 9900 has varying capabilities and can cascade to sub-controllers
- * (cascading should be purely internal)
+ * (cascading should be purely internal)
* 9904 is hardwired with 4 serial ports
* 9912 and 9922 are hardwired with 2 serial ports
*/
@@ -1030,7 +1151,7 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
/* OxSemi Tornado devices are all 0xCxxx */
if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
- (dev->device & 0xF000) != 0xC000)
+ (dev->device & 0xF000) != 0xC000)
return 0;
p = pci_iomap(dev, 0, 5);
@@ -1081,10 +1202,10 @@ struct quatech_feature {
static struct quatech_feature quatech_cards[] = {
- { PCI_DEVICE_ID_QUATECH_QSC100, 1 },
- { PCI_DEVICE_ID_QUATECH_DSC100, 1 },
+ { PCI_DEVICE_ID_QUATECH_QSC100, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC100, 1 },
{ PCI_DEVICE_ID_QUATECH_DSC100E, 0 },
- { PCI_DEVICE_ID_QUATECH_DSC200, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC200, 1 },
{ PCI_DEVICE_ID_QUATECH_DSC200E, 0 },
{ PCI_DEVICE_ID_QUATECH_ESC100D, 1 },
{ PCI_DEVICE_ID_QUATECH_ESC100M, 1 },
@@ -1237,7 +1358,7 @@ static int pci_quatech_clock(struct uart_8250_port *port)
}
reg &= QOPR_CLOCK_X8;
if (reg == QOPR_CLOCK_X2) {
- clock = 3685400;
+ clock = 3685400;
set = QOPR_CLOCK_X2;
} else if (reg == QOPR_CLOCK_X4) {
clock = 7372800;
@@ -1369,8 +1490,8 @@ ce4100_serial_setup(struct serial_private *priv,
static int
pci_omegapci_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
return setup_port(priv, port, 2, idx * 8, 0);
}
@@ -1394,7 +1515,7 @@ pci_brcm_trumanage_setup(struct serial_private *priv,
/* We should do proper H/W transceiver setting before change to RS485 mode */
static int pci_fintek_rs485_config(struct uart_port *port,
- struct serial_rs485 *rs485)
+ struct serial_rs485 *rs485)
{
struct pci_dev *pci_dev = to_pci_dev(port->dev);
u8 setting;
@@ -1440,8 +1561,8 @@ static int pci_fintek_rs485_config(struct uart_port *port,
}
static int pci_fintek_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
struct pci_dev *pdev = priv->dev;
u8 *data;
@@ -1574,7 +1695,7 @@ static unsigned int kt_serial_in(struct uart_port *p, int offset)
* When the Intel ME (management engine) gets reset its serial
* port registers could return 0 momentarily. Functions like
* serial8250_console_write, read and save the IER, perform
- * some operation and then restore it. In order to avoid
+ * some operation and then restore it. In order to avoid
* setting IER register inadvertently to 0, if the value read
* is 0, double check with ier value in uart_8250_port and use
* that instead. up->ier should be the same value as what is
@@ -1609,8 +1730,8 @@ static int pci_eg20t_init(struct pci_dev *dev)
static int
pci_wch_ch353_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16550A;
@@ -1629,8 +1750,8 @@ pci_wch_ch355_setup(struct serial_private *priv,
static int
pci_wch_ch38x_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16850;
@@ -1750,15 +1871,15 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
* ADDI-DATA GmbH communication cards <info@xxxxxxxxxxxxx>
*/
{
- .vendor = PCI_VENDOR_ID_AMCC,
- .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = addidata_apci7800_setup,
+ .vendor = PCI_VENDOR_ID_AMCC,
+ .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = addidata_apci7800_setup,
},
/*
* AFAVLAB cards - these may be called via parport_serial
- * It is not clear whether this applies to all products.
+ * It is not clear whether this applies to all products.
*/
{
.vendor = PCI_VENDOR_ID_AFAVLAB,
@@ -1956,6 +2077,87 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_ni8430_setup,
.exit = pci_ni8430_exit,
},
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCIE_DEVICE_ID_NI_PXIE8430_2328,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8430_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCIE_DEVICE_ID_NI_PXIE8430_23216,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8430_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8431_4852,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8431_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8431_4854,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8431_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8431_4858,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8431_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8433_4852,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8431_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8433_4854,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8431_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCIE_DEVICE_ID_NI_PXIE8431_4858,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8431_setup,
+ .exit = pci_ni8430_exit,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCIE_DEVICE_ID_NI_PXIE8431_48516,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8431_setup,
+ .exit = pci_ni8430_exit,
+ },
/* Quatech */
{
.vendor = PCI_VENDOR_ID_QUATECH,
@@ -2028,109 +2230,109 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.exit = pci_plx9050_exit,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
{
- .vendor = PCI_VENDOR_ID_ACCESIO,
- .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
@@ -2305,72 +2507,72 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_default_setup,
},
{
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8811,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8811,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8812,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8812,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8813,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8813,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8814,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8814,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = 0x10DB,
- .device = 0x8027,
+ .vendor = 0x10DB,
+ .device = 0x8027,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = 0x10DB,
- .device = 0x8028,
+ .vendor = 0x10DB,
+ .device = 0x8028,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = 0x10DB,
- .device = 0x8029,
+ .vendor = 0x10DB,
+ .device = 0x8029,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = 0x10DB,
- .device = 0x800C,
+ .vendor = 0x10DB,
+ .device = 0x800C,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
- .vendor = 0x10DB,
- .device = 0x800D,
+ .vendor = 0x10DB,
+ .device = 0x800D,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
@@ -2388,35 +2590,35 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
/* WCH CH353 1S1P card (16550 clone) */
{
- .vendor = PCI_VENDOR_ID_WCH,
- .device = PCI_DEVICE_ID_WCH_CH353_1S1P,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch353_setup,
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_1S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
},
/* WCH CH353 2S1P card (16550 clone) */
{
- .vendor = PCI_VENDOR_ID_WCH,
- .device = PCI_DEVICE_ID_WCH_CH353_2S1P,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch353_setup,
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_2S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
},
/* WCH CH353 4S card (16550 clone) */
{
- .vendor = PCI_VENDOR_ID_WCH,
- .device = PCI_DEVICE_ID_WCH_CH353_4S,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch353_setup,
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
},
/* WCH CH353 2S1PF card (16550 clone) */
{
- .vendor = PCI_VENDOR_ID_WCH,
- .device = PCI_DEVICE_ID_WCH_CH353_2S1PF,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch353_setup,
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_2S1PF,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
},
/* WCH CH352 2S card (16550 clone) */
{
@@ -2436,27 +2638,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
/* WCH CH382 2S card (16850 clone) */
{
- .vendor = PCIE_VENDOR_ID_WCH,
- .device = PCIE_DEVICE_ID_WCH_CH382_2S,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch38x_setup,
+ .vendor = PCIE_VENDOR_ID_WCH,
+ .device = PCIE_DEVICE_ID_WCH_CH382_2S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch38x_setup,
},
/* WCH CH382 2S1P card (16850 clone) */
{
- .vendor = PCIE_VENDOR_ID_WCH,
- .device = PCIE_DEVICE_ID_WCH_CH382_2S1P,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch38x_setup,
+ .vendor = PCIE_VENDOR_ID_WCH,
+ .device = PCIE_DEVICE_ID_WCH_CH382_2S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch38x_setup,
},
/* WCH CH384 4S card (16850 clone) */
{
- .vendor = PCIE_VENDOR_ID_WCH,
- .device = PCIE_DEVICE_ID_WCH_CH384_4S,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch38x_setup,
+ .vendor = PCIE_VENDOR_ID_WCH,
+ .device = PCIE_DEVICE_ID_WCH_CH384_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch38x_setup,
},
/*
* ASIX devices with FIFO bug
@@ -2526,9 +2728,9 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
for (quirk = pci_serial_quirks; ; quirk++)
if (quirk_id_matches(quirk->vendor, dev->vendor) &&
- quirk_id_matches(quirk->device, dev->device) &&
- quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
- quirk_id_matches(quirk->subdevice, dev->subsystem_device))
+ quirk_id_matches(quirk->device, dev->device) &&
+ quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
+ quirk_id_matches(quirk->subdevice, dev->subsystem_device))
break;
return quirk;
}
@@ -2549,13 +2751,13 @@ static inline int get_pci_irq(struct pci_dev *dev,
* driver_data member.
*
* The makeup of these names are:
- * pbn_bn{_bt}_n_baud{_offsetinhex}
+ * pbn_bn{_bt}_n_baud{_offsetinhex}
*
- * bn = PCI BAR number
- * bt = Index using PCI BARs
- * n = number of serial ports
- * baud = baud rate
- * offsetinhex = offset for each sequential port (in hex)
+ * bn = PCI BAR number
+ * bt = Index using PCI BARs
+ * n = number of serial ports
+ * baud = baud rate
+ * offsetinhex = offset for each sequential port (in hex)
*
* This table is sorted by (in order): bn, bt, baud, offsetindex, n.
*
@@ -2679,6 +2881,13 @@ enum pci_board_num_t {
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
+ pbn_ni8430_pxie_8,
+ pbn_ni8430_pxie_16,
+ pbn_ni8431_2,
+ pbn_ni8431_4,
+ pbn_ni8431_8,
+ pbn_ni8431_pxie_8,
+ pbn_ni8431_pxie_16,
pbn_ADDIDATA_PCIe_1_3906250,
pbn_ADDIDATA_PCIe_2_3906250,
pbn_ADDIDATA_PCIe_4_3906250,
@@ -2701,7 +2910,7 @@ enum pci_board_num_t {
/*
* uart_offset - the space between channels
* reg_shift - describes how the UART registers are mapped
- * to PCI memory by the card.
+ * to PCI memory by the card.
* For example IER register on SBS, Inc. PMC-OctPro is located at
* offset 0x10 from the UART base, while UART_IER is defined as 1
* in include/linux/serial_reg.h,
@@ -2765,10 +2974,10 @@ static struct pciserial_board pci_boards[] = {
},
[pbn_b0_2_1130000] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 1130000,
- .uart_offset = 8,
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 1130000,
+ .uart_offset = 8,
},
[pbn_b0_4_1152000] = {
@@ -3000,10 +3209,10 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 8,
},
[pbn_b2_4_115200] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
},
[pbn_b2_8_115200] = {
.flags = FL_BASE2,
@@ -3320,6 +3529,55 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 0x10,
.first_offset = 0x800,
},
+ [pbn_ni8430_pxie_16] = {
+ .flags = FL_BASE0,
+ .num_ports = 16,
+ .base_baud = 3125000,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8430_pxie_8] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3125000,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8431_8] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3686400,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8431_4] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 3686400,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8431_2] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 3686400,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8431_pxie_16] = {
+ .flags = FL_BASE0,
+ .num_ports = 16,
+ .base_baud = 3125000,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8431_pxie_8] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3125000,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
/*
* ADDI-DATA GmbH PCI-Express communication cards <info@xxxxxxxxxxxxx>
*/
@@ -3355,7 +3613,7 @@ static struct pciserial_board pci_boards[] = {
.flags = FL_BASE_BARS,
.num_ports = 2,
.base_baud = 921600,
- .reg_shift = 2,
+ .reg_shift = 2,
},
[pbn_omegapci] = {
.flags = FL_BASE0,
@@ -3402,35 +3660,35 @@ static struct pciserial_board pci_boards[] = {
[pbn_wch384_4] = {
.flags = FL_BASE0,
.num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- .first_offset = 0xC0,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ .first_offset = 0xC0,
},
/*
* Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
*/
[pbn_pericom_PI7C9X7951] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 921600,
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
.uart_offset = 0x8,
},
[pbn_pericom_PI7C9X7952] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 921600,
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
.uart_offset = 0x8,
},
[pbn_pericom_PI7C9X7954] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 921600,
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
.uart_offset = 0x8,
},
[pbn_pericom_PI7C9X7958] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 921600,
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
.uart_offset = 0x8,
},
};
@@ -3492,9 +3750,9 @@ static int serial_pci_is_class_communication(struct pci_dev *dev)
* interface is greater than 6, give up.
*/
if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
- ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) &&
- ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
- (dev->class & 0xff) > 6)
+ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) &&
+ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
+ (dev->class & 0xff) > 6)
return -ENODEV;
return 0;
@@ -3534,7 +3792,7 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
/*
* If there is 1 or 0 iomem regions, and exactly one port,
- * use it. We guess the number of ports based on the IO
+ * use it. We guess the number of ports based on the IO
* region size.
*/
if (num_iomem <= 1 && num_port == 1) {
@@ -3552,8 +3810,8 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
num_port = 0;
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
- pci_resource_len(dev, i) == 8 &&
- (first_port == -1 || (first_port + num_port) == i)) {
+ pci_resource_len(dev, i) == 8 &&
+ (first_port == -1 || (first_port + num_port) == i)) {
num_port++;
if (first_port == -1)
first_port = i;
@@ -3574,11 +3832,11 @@ serial_pci_matches(const struct pciserial_board *board,
const struct pciserial_board *guessed)
{
return
- board->num_ports == guessed->num_ports &&
- board->base_baud == guessed->base_baud &&
- board->uart_offset == guessed->uart_offset &&
- board->reg_shift == guessed->reg_shift &&
- board->first_offset == guessed->first_offset;
+ board->num_ports == guessed->num_ports &&
+ board->base_baud == guessed->base_baud &&
+ board->uart_offset == guessed->uart_offset &&
+ board->reg_shift == guessed->reg_shift &&
+ board->first_offset == guessed->first_offset;
}
struct serial_private *
@@ -3599,9 +3857,9 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
/*
* Run the new-style initialization function.
* The initialization function returns:
- * <0 - error
- * 0 - use board->num_ports
- * >0 - number of ports
+ * <0 - error
+ * 0 - use board->num_ports
+ * >0 - number of ports
*/
if (quirk->init) {
rc = quirk->init(dev);
@@ -3614,8 +3872,8 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
}
priv = kzalloc(sizeof(struct serial_private) +
- sizeof(unsigned int) * nr_ports,
- GFP_KERNEL);
+ sizeof(unsigned int) * nr_ports,
+ GFP_KERNEL);
if (!priv) {
priv = ERR_PTR(-ENOMEM);
goto err_deinit;
@@ -3714,7 +3972,7 @@ void pciserial_resume_ports(struct serial_private *priv)
EXPORT_SYMBOL_GPL(pciserial_resume_ports);
/*
- * Probe one serial board. Unfortunately, there is no rhyme nor reason
+ * Probe one serial board. Unfortunately, there is no rhyme nor reason
* to the arrangement of serial ports on a PCI card.
*/
static int
@@ -3760,7 +4018,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
board = &tmp;
/*
- * We matched one of our class entries. Try to
+ * We matched one of our class entries. Try to
* determine the parameters of this board.
*/
rc = serial_pci_guess_board(dev, &tmp);
@@ -3773,11 +4031,11 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
* then we no longer need this entry.
*/
memcpy(&tmp, &pci_boards[pbn_default],
- sizeof(struct pciserial_board));
+ sizeof(struct pciserial_board));
rc = serial_pci_guess_board(dev, &tmp);
if (rc == 0 && serial_pci_matches(board, &tmp))
moan_device("Redundant entry in serial pci_table.",
- dev);
+ dev);
}
priv = pciserial_init_ports(dev, board);
@@ -4015,7 +4273,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_plx_romulus },
/*
* EndRun Technologies. PCI express device range.
- * EndRun PTP/1588 has 2 Native UARTs.
+ * EndRun PTP/1588 has 2 Native UARTs.
*/
{ PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -4098,7 +4356,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
/*
* The below card is a little controversial since it is the
- * subject of a PCI vendor/device ID clash. (See
+ * subject of a PCI vendor/device ID clash. (See
* www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
* For now just used the hex ID 0x950a.
*/
@@ -4127,136 +4385,136 @@ static const struct pci_device_id serial_pci_tbl[] = {
/*
* Oxford Semiconductor Inc. Tornado PCI express device range.
*/
- { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_4_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_4_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_8_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_8_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
+ { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
/*
@@ -4308,7 +4566,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
/*
* Titan Electronic cards
- * The 400L and 800L have a custom setup quirk.
+ * The 400L and 800L have a custom setup quirk.
*/
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -4644,19 +4902,19 @@ static const struct pci_device_id serial_pci_tbl[] = {
/*
* Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
*/
- { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_pericom_PI7C9X7951 },
- { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_pericom_PI7C9X7952 },
- { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_pericom_PI7C9X7954 },
- { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_pericom_PI7C9X7958 },
@@ -4786,7 +5044,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
* IntaShield IS-400
*/
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
pbn_b2_4_115200 },
/*
* BrainBoxes UC-260
@@ -4802,10 +5060,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
/*
* Perle PCI-RAS cards
*/
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
0, 0, pbn_b2_4_921600 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
0, 0, pbn_b2_8_921600 },
@@ -5003,6 +5261,33 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
+ { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_2328,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_pxie_8 },
+ { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_23216,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_pxie_16 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4852,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8431_2 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4854,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8431_4 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4858,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8431_8 },
+ { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_4858,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8431_pxie_8 },
+ { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_48516,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8431_pxie_16 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4852,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8431_2 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4854,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8431_4 },
/*
* ADDI-DATA GmbH communication cards <info@xxxxxxxxxxxxx>
@@ -5179,7 +5464,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
0, 0, pbn_b0_bt_4_115200 },
/* Intel CE4100 */
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ce4100_1_115200 },
/*
@@ -5314,8 +5599,8 @@ static struct pci_driver serial_pci_driver = {
.name = "serial",
.probe = pciserial_init_one,
.remove = pciserial_remove_one,
- .driver = {
- .pm = &pciserial_pm_ops,
+ .driver = {
+ .pm = &pciserial_pm_ops,
},
.id_table = serial_pci_tbl,
.err_handler = &serial8250_err_handler,
--
2.17.1