[PATCH v2 2/4] net: dsa: vsc73xx: Split vsc73xx driver

From: Pawel Dembicki
Date: Wed Jul 03 2019 - 05:03:28 EST


This driver (currently) only takes control of the switch chip over
SPI and configures it to route packages around when connected to a
CPU port. But Vitesse chip support also parallel interface.

This patch split driver into two parts: core and spi. It is required
for add support to another managing interface.

Tested-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Pawel Dembicki <paweldembicki@xxxxxxxxx>
---
Changes in v2:
- Make patch less invasive
- Move mutex to SPI part of driver
- v2 also tested by Linus

drivers/net/dsa/Kconfig | 11 +-
drivers/net/dsa/Makefile | 3 +-
...tesse-vsc73xx.c => vitesse-vsc73xx-core.c} | 170 +--------------
drivers/net/dsa/vitesse-vsc73xx-spi.c | 203 ++++++++++++++++++
drivers/net/dsa/vitesse-vsc73xx.h | 29 +++
5 files changed, 254 insertions(+), 162 deletions(-)
rename drivers/net/dsa/{vitesse-vsc73xx.c => vitesse-vsc73xx-core.c} (91%)
create mode 100644 drivers/net/dsa/vitesse-vsc73xx-spi.c
create mode 100644 drivers/net/dsa/vitesse-vsc73xx.h

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index b91e78e3598f..4ab2aa09e2e4 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -99,8 +99,8 @@ config NET_DSA_SMSC_LAN9303_MDIO
for MDIO managed mode.

config NET_DSA_VITESSE_VSC73XX
- tristate "Vitesse VSC7385/7388/7395/7398 support"
- depends on OF && SPI
+ tristate
+ depends on OF
depends on NET_DSA
select FIXED_PHY
select VITESSE_PHY
@@ -109,4 +109,11 @@ config NET_DSA_VITESSE_VSC73XX
This enables support for the Vitesse VSC7385, VSC7388,
VSC7395 and VSC7398 SparX integrated ethernet switches.

+config NET_DSA_VITESSE_VSC73XX_SPI
+ tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
+ depends on SPI
+ select NET_DSA_VITESSE_VSC73XX
+ ---help---
+ This enables support for the Vitesse VSC7385, VSC7388, VSC7395
+ and VSC7398 SparX integrated ethernet switches in SPI managed mode.
endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index fefb6aaa82ba..117bf78be211 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -14,7 +14,8 @@ realtek-objs := realtek-smi.o rtl8366.o rtl8366rb.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
-obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx.o
+obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx-core.o
+obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_SPI) += vitesse-vsc73xx-spi.o
obj-y += b53/
obj-y += microchip/
obj-y += mv88e6xxx/
diff --git a/drivers/net/dsa/vitesse-vsc73xx.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
similarity index 91%
rename from drivers/net/dsa/vitesse-vsc73xx.c
rename to drivers/net/dsa/vitesse-vsc73xx-core.c
index d4780610ea8a..10063f31d9a3 100644
--- a/drivers/net/dsa/vitesse-vsc73xx.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -10,10 +10,6 @@
* handling the switch in a memory-mapped manner by connecting to that external
* CPU's memory bus.
*
- * This driver (currently) only takes control of the switch chip over SPI and
- * configures it to route packages around when connected to a CPU port. The
- * chip has embedded PHYs and VLAN support so we model it using DSA.
- *
* Copyright (C) 2018 Linus Wallej <linus.walleij@xxxxxxxxxx>
* Includes portions of code from the firmware uploader by:
* Copyright (C) 2009 Gabor Juhos <juhosg@xxxxxxxxxxx>
@@ -24,8 +20,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
#include <linux/bitops.h>
#include <linux/if_bridge.h>
#include <linux/etherdevice.h>
@@ -34,6 +28,8 @@
#include <linux/random.h>
#include <net/dsa.h>

+#include "vitesse-vsc73xx.h"
+
#define VSC73XX_BLOCK_MAC 0x1 /* Subblocks 0-4, 6 (CPU port) */
#define VSC73XX_BLOCK_ANALYZER 0x2 /* Only subblock 0 */
#define VSC73XX_BLOCK_MII 0x3 /* Subblocks 0 and 1 */
@@ -255,13 +251,6 @@
#define VSC73XX_GLORESET_PHY_RESET BIT(1)
#define VSC73XX_GLORESET_MASTER_RESET BIT(0)

-#define VSC73XX_CMD_MODE_READ 0
-#define VSC73XX_CMD_MODE_WRITE 1
-#define VSC73XX_CMD_MODE_SHIFT 4
-#define VSC73XX_CMD_BLOCK_SHIFT 5
-#define VSC73XX_CMD_BLOCK_MASK 0x7
-#define VSC73XX_CMD_SUBBLOCK_MASK 0xf
-
#define VSC7385_CLOCK_DELAY ((3 << 4) | 3)
#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3)

@@ -274,20 +263,6 @@
VSC73XX_ICPU_CTRL_CLK_EN | \
VSC73XX_ICPU_CTRL_SRST)

-/**
- * struct vsc73xx - VSC73xx state container
- */
-struct vsc73xx {
- struct device *dev;
- struct gpio_desc *reset;
- struct spi_device *spi;
- struct dsa_switch *ds;
- struct gpio_chip gc;
- u16 chipid;
- u8 addr[ETH_ALEN];
- struct mutex lock; /* Protects SPI traffic */
-};
-
#define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
#define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
#define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
@@ -365,7 +340,7 @@ static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
{ 29, "TxQoSClass3" }, /* non-standard counter */
};

-static int vsc73xx_is_addr_valid(u8 block, u8 subblock)
+int vsc73xx_is_addr_valid(u8 block, u8 subblock)
{
switch (block) {
case VSC73XX_BLOCK_MAC:
@@ -396,96 +371,18 @@ static int vsc73xx_is_addr_valid(u8 block, u8 subblock)

return 0;
}
-
-static u8 vsc73xx_make_addr(u8 mode, u8 block, u8 subblock)
-{
- u8 ret;
-
- ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
- ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
- ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
-
- return ret;
-}
+EXPORT_SYMBOL(vsc73xx_is_addr_valid);

static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
u32 *val)
{
- struct spi_transfer t[2];
- struct spi_message m;
- u8 cmd[4];
- u8 buf[4];
- int ret;
-
- if (!vsc73xx_is_addr_valid(block, subblock))
- return -EINVAL;
-
- spi_message_init(&m);
-
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- t[1].rx_buf = buf;
- t[1].len = sizeof(buf);
- spi_message_add_tail(&t[1], &m);
-
- cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
- cmd[1] = reg;
- cmd[2] = 0;
- cmd[3] = 0;
-
- mutex_lock(&vsc->lock);
- ret = spi_sync(vsc->spi, &m);
- mutex_unlock(&vsc->lock);
-
- if (ret)
- return ret;
-
- *val = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
-
- return 0;
+ return vsc->ops->read(vsc, block, subblock, reg, val);
}

static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
u32 val)
{
- struct spi_transfer t[2];
- struct spi_message m;
- u8 cmd[2];
- u8 buf[4];
- int ret;
-
- if (!vsc73xx_is_addr_valid(block, subblock))
- return -EINVAL;
-
- spi_message_init(&m);
-
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- t[1].tx_buf = buf;
- t[1].len = sizeof(buf);
- spi_message_add_tail(&t[1], &m);
-
- cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
- cmd[1] = reg;
-
- buf[0] = (val >> 24) & 0xff;
- buf[1] = (val >> 16) & 0xff;
- buf[2] = (val >> 8) & 0xff;
- buf[3] = val & 0xff;
-
- mutex_lock(&vsc->lock);
- ret = spi_sync(vsc->spi, &m);
- mutex_unlock(&vsc->lock);
-
- return ret;
+ return vsc->ops->write(vsc, block, subblock, reg, val);
}

static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
@@ -1245,21 +1142,11 @@ static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
return 0;
}

-static int vsc73xx_probe(struct spi_device *spi)
+int vsc73xx_probe(struct vsc73xx *vsc)
{
- struct device *dev = &spi->dev;
- struct vsc73xx *vsc;
+ struct device *dev = vsc->dev;
int ret;

- vsc = devm_kzalloc(dev, sizeof(*vsc), GFP_KERNEL);
- if (!vsc)
- return -ENOMEM;
-
- spi_set_drvdata(spi, vsc);
- vsc->spi = spi_dev_get(spi);
- vsc->dev = dev;
- mutex_init(&vsc->lock);
-
/* Release reset, if any */
vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(vsc->reset)) {
@@ -1270,14 +1157,6 @@ static int vsc73xx_probe(struct spi_device *spi)
/* Wait 20ms according to datasheet table 245 */
msleep(20);

- spi->mode = SPI_MODE_0;
- spi->bits_per_word = 8;
- ret = spi_setup(spi);
- if (ret < 0) {
- dev_err(dev, "spi setup failed.\n");
- return ret;
- }
-
ret = vsc73xx_detect(vsc);
if (ret) {
dev_err(dev, "no chip found (%d)\n", ret);
@@ -1321,43 +1200,16 @@ static int vsc73xx_probe(struct spi_device *spi)

return 0;
}
+EXPORT_SYMBOL(vsc73xx_probe);

-static int vsc73xx_remove(struct spi_device *spi)
+int vsc73xx_remove(struct vsc73xx *vsc)
{
- struct vsc73xx *vsc = spi_get_drvdata(spi);
-
dsa_unregister_switch(vsc->ds);
gpiod_set_value(vsc->reset, 1);

return 0;
}
-
-static const struct of_device_id vsc73xx_of_match[] = {
- {
- .compatible = "vitesse,vsc7385",
- },
- {
- .compatible = "vitesse,vsc7388",
- },
- {
- .compatible = "vitesse,vsc7395",
- },
- {
- .compatible = "vitesse,vsc7398",
- },
- { },
-};
-MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
-
-static struct spi_driver vsc73xx_driver = {
- .probe = vsc73xx_probe,
- .remove = vsc73xx_remove,
- .driver = {
- .name = "vsc73xx",
- .of_match_table = vsc73xx_of_match,
- },
-};
-module_spi_driver(vsc73xx_driver);
+EXPORT_SYMBOL(vsc73xx_remove);

MODULE_AUTHOR("Linus Walleij <linus.walleij@xxxxxxxxxx>");
MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
diff --git a/drivers/net/dsa/vitesse-vsc73xx-spi.c b/drivers/net/dsa/vitesse-vsc73xx-spi.c
new file mode 100644
index 000000000000..0fe1e6175a4a
--- /dev/null
+++ b/drivers/net/dsa/vitesse-vsc73xx-spi.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/* DSA driver for:
+ * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+ *
+ * This driver takes control of the switch chip over SPI and
+ * configures it to route packages around when connected to a CPU port.
+ *
+ * Copyright (C) 2018 Linus Wallej <linus.walleij@xxxxxxxxxx>
+ * Includes portions of code from the firmware uploader by:
+ * Copyright (C) 2009 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+#include "vitesse-vsc73xx.h"
+
+#define VSC73XX_CMD_SPI_MODE_READ 0
+#define VSC73XX_CMD_SPI_MODE_WRITE 1
+#define VSC73XX_CMD_SPI_MODE_SHIFT 4
+#define VSC73XX_CMD_SPI_BLOCK_SHIFT 5
+#define VSC73XX_CMD_SPI_BLOCK_MASK 0x7
+#define VSC73XX_CMD_SPI_SUBBLOCK_MASK 0xf
+
+/**
+ * struct vsc73xx_spi - VSC73xx SPI state container
+ */
+struct vsc73xx_spi {
+ struct spi_device *spi;
+ struct mutex lock; /* Protects SPI traffic */
+ struct vsc73xx vsc;
+};
+
+static const struct vsc73xx_ops vsc73xx_spi_ops;
+
+static u8 vsc73xx_make_addr(u8 mode, u8 block, u8 subblock)
+{
+ u8 ret;
+
+ ret = (block & VSC73XX_CMD_SPI_BLOCK_MASK)
+ << VSC73XX_CMD_SPI_BLOCK_SHIFT;
+ ret |= (mode & 1) << VSC73XX_CMD_SPI_MODE_SHIFT;
+ ret |= subblock & VSC73XX_CMD_SPI_SUBBLOCK_MASK;
+
+ return ret;
+}
+
+static int vsc73xx_spi_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 *val)
+{
+ struct vsc73xx_spi *vsc_spi = vsc->priv;
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u8 cmd[4];
+ u8 buf[4];
+ int ret;
+
+ if (!vsc73xx_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = sizeof(buf);
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_SPI_MODE_READ, block, subblock);
+ cmd[1] = reg;
+ cmd[2] = 0;
+ cmd[3] = 0;
+
+ mutex_lock(&vsc_spi->lock);
+ ret = spi_sync(vsc_spi->spi, &m);
+ mutex_unlock(&vsc_spi->lock);
+
+ if (ret)
+ return ret;
+
+ *val = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
+
+ return 0;
+}
+
+static int vsc73xx_spi_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 val)
+{
+ struct vsc73xx_spi *vsc_spi = vsc->priv;
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u8 cmd[2];
+ u8 buf[4];
+ int ret;
+
+ if (!vsc73xx_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = sizeof(buf);
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_SPI_MODE_WRITE, block, subblock);
+ cmd[1] = reg;
+
+ buf[0] = (val >> 24) & 0xff;
+ buf[1] = (val >> 16) & 0xff;
+ buf[2] = (val >> 8) & 0xff;
+ buf[3] = val & 0xff;
+
+ mutex_lock(&vsc_spi->lock);
+ ret = spi_sync(vsc_spi->spi, &m);
+ mutex_unlock(&vsc_spi->lock);
+
+ return ret;
+}
+
+static int vsc73xx_spi_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct vsc73xx_spi *vsc_spi;
+ int ret;
+
+ vsc_spi = devm_kzalloc(dev, sizeof(*vsc_spi), GFP_KERNEL);
+ if (!vsc_spi)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, vsc_spi);
+ vsc_spi->spi = spi_dev_get(spi);
+ vsc_spi->vsc.dev = dev;
+ vsc_spi->vsc.priv = vsc_spi;
+ vsc_spi->vsc.ops = &vsc73xx_spi_ops;
+ mutex_init(&vsc_spi->lock);
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(dev, "spi setup failed.\n");
+ return ret;
+ }
+
+ return vsc73xx_probe(&vsc_spi->vsc);
+}
+
+static int vsc73xx_spi_remove(struct spi_device *spi)
+{
+ struct vsc73xx_spi *vsc_spi = spi_get_drvdata(spi);
+
+ return vsc73xx_remove(&vsc_spi->vsc);
+}
+
+static const struct vsc73xx_ops vsc73xx_spi_ops = {
+ .read = vsc73xx_spi_read,
+ .write = vsc73xx_spi_write,
+};
+
+static const struct of_device_id vsc73xx_of_match[] = {
+ {
+ .compatible = "vitesse,vsc7385",
+ },
+ {
+ .compatible = "vitesse,vsc7388",
+ },
+ {
+ .compatible = "vitesse,vsc7395",
+ },
+ {
+ .compatible = "vitesse,vsc7398",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
+
+static struct spi_driver vsc73xx_spi_driver = {
+ .probe = vsc73xx_spi_probe,
+ .remove = vsc73xx_spi_remove,
+ .driver = {
+ .name = "vsc73xx-spi",
+ .of_match_table = vsc73xx_of_match,
+ },
+};
+module_spi_driver(vsc73xx_spi_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
new file mode 100644
index 000000000000..7478f8d4e0a9
--- /dev/null
+++ b/drivers/net/dsa/vitesse-vsc73xx.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio/driver.h>
+
+/**
+ * struct vsc73xx - VSC73xx state container
+ */
+struct vsc73xx {
+ struct device *dev;
+ struct gpio_desc *reset;
+ struct dsa_switch *ds;
+ struct gpio_chip gc;
+ u16 chipid;
+ u8 addr[ETH_ALEN];
+ const struct vsc73xx_ops *ops;
+ void *priv;
+};
+
+struct vsc73xx_ops {
+ int (*read)(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 *val);
+ int (*write)(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 val);
+};
+
+int vsc73xx_is_addr_valid(u8 block, u8 subblock);
+int vsc73xx_probe(struct vsc73xx *vsc);
+int vsc73xx_remove(struct vsc73xx *vsc);
--
2.20.1