Re: [PATCH v1 net-next] net: stmmac: enable clause 45 mdio support

[Andrew Lunn]

On Wed, Jul 03, 2019 at 05:50:04PM +0800, Voon Weifeng wrote:
> @@ -155,22 +171,26 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
>  	struct stmmac_priv *priv = netdev_priv(ndev);
>  	unsigned int mii_address = priv->hw->mii.addr;
>  	unsigned int mii_data = priv->hw->mii.data;
> -	u32 v;
> -	int data;
>  	u32 value = MII_BUSY;
> +	int data = 0;
> +	u32 v;
>  
>  	value |= (phyaddr << priv->hw->mii.addr_shift)
>  		& priv->hw->mii.addr_mask;
>  	value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
>  	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
>  		& priv->hw->mii.clk_csr_mask;
> -	if (priv->plat->has_gmac4)
> +	if (priv->plat->has_gmac4) {
>  		value |= MII_GMAC4_READ;
> +		if (phyreg & MII_ADDR_C45)
> +			stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
> +	}
>  
>  	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
>  			       100, 10000))
>  		return -EBUSY;
>  
> +	writel(data, priv->ioaddr + mii_data);

That looks odd. Could you explain why it is needed.

Thanks
	Andrew