[PATCH v2 7/7] net: phy: realtek: configure RTL8211E LEDs

From: Matthias Kaehlcke
Date: Wed Jul 03 2019 - 15:37:54 EST


Configure the RTL8211E LEDs behavior when the device tree property
'realtek,led-modes' is specified.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes in v2:
- patch added to the series
---
drivers/net/phy/realtek.c | 63 +++++++++++++++++++++++++++++++++++++--
1 file changed, 61 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 45fee4612031..559aec547738 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -9,6 +9,7 @@
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*/
#include <linux/bitops.h>
+#include <linux/bits.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -35,6 +36,15 @@
#define RTL8211E_EEE_LED_MODE1 0x05
#define RTL8211E_EEE_LED_MODE2 0x06

+/* RTL8211E extension page 44 */
+#define RTL8211E_LACR 0x1a
+#define RLT8211E_LACR_LEDACTCTRL_SHIFT 4
+#define RLT8211E_LACR_LEDACTCTRL_MASK GENMASK(6, 4)
+#define RTL8211E_LCR 0x1c
+#define RTL8211E_LCR_LEDCTRL_MASK (GENMASK(2, 0) | \
+ GENMASK(6, 4) | \
+ GENMASK(10, 8))
+
/* RTL8211E extension page 160 */
#define RTL8211E_SCR 0x1a
#define RTL8211E_SCR_DISABLE_RXC_SSC BIT(2)
@@ -124,6 +134,56 @@ static int rtl8211e_disable_eee_led_mode(struct phy_device *phydev)
return phy_restore_page(phydev, oldpage, ret);
}

+static int rtl8211e_config_leds(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ int count, i, oldpage, ret;
+ u16 lacr_bits = 0, lcr_bits = 0;
+
+ if (!dev->of_node)
+ return 0;
+
+ if (of_property_read_bool(dev->of_node, "realtek,eee-led-mode-disable"))
+ rtl8211e_disable_eee_led_mode(phydev);
+
+ count = of_property_count_elems_of_size(dev->of_node,
+ "realtek,led-modes",
+ sizeof(u32));
+ if (count < 0 || count > 3)
+ return -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ u32 val;
+
+ of_property_read_u32_index(dev->of_node,
+ "realtek,led-modes", i, &val);
+ lacr_bits |= (u16)(val >> 16) <<
+ (RLT8211E_LACR_LEDACTCTRL_SHIFT + i);
+ lcr_bits |= (u16)(val & 0xf) << (i * 4);
+ }
+
+ oldpage = rtl8211e_select_ext_page(phydev, 44);
+ if (oldpage < 0) {
+ dev_err(dev, "failed to select extended page: %d\n", oldpage);
+ goto err;
+ }
+
+ ret = __phy_modify(phydev, RTL8211E_LACR,
+ RLT8211E_LACR_LEDACTCTRL_MASK, lacr_bits);
+ if (ret) {
+ dev_err(dev, "failed to write LACR reg: %d\n", ret);
+ goto err;
+ }
+
+ ret = __phy_modify(phydev, RTL8211E_LCR,
+ RTL8211E_LCR_LEDCTRL_MASK, lcr_bits);
+ if (ret)
+ dev_err(dev, "failed to write LCR reg: %d\n", ret);
+
+err:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
static int rtl8211e_config_init(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
@@ -137,8 +197,7 @@ static int rtl8211e_config_init(struct phy_device *phydev)
dev_err(dev, "failed to enable SSC on RXC: %d\n", ret);
}

- if (of_property_read_bool(dev->of_node, "realtek,eee-led-mode-disable"))
- rtl8211e_disable_eee_led_mode(phydev);
+ rtl8211e_config_leds(phydev);

return 0;
}
--
2.22.0.410.gd8fdbe21b5-goog