RE: [EXT] Re: [PATCH nvmem 1/1] nvmem: imx: correct the fuse word index

[Andy Duan]

From: Andy Duan Sent: Friday, July 5, 2019 12:08 AM
> From: Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx> Sent: Thursday, July 4,
> 2019 11:46 PM
> > Hi,
> >
> > On Thu,  4 Jul 2019 22:20:15 +0800 fugang.duan@xxxxxxx wrote:
> > > From: Fugang Duan <fugang.duan@xxxxxxx>
> > >
> > > iMX8 fuse word index represent as one 4-bytes word, it should not be
> > > divided by 4.
> > >
> > > Exp:
> > > - MAC0 address layout in fuse:
> > > offset 708: MAC[3] MAC[2] MAC[1] MAC[0]
> > > offset 709: XX     xx     MAC[5] MAC[4]
> > >
> > > Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx>
> > > ---
> > >  drivers/nvmem/imx-ocotp-scu.c | 6 +++---
> > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/nvmem/imx-ocotp-scu.c
> > > b/drivers/nvmem/imx-ocotp-scu.c index d9dc482..be2f5f0 100644
> > > --- a/drivers/nvmem/imx-ocotp-scu.c
> > > +++ b/drivers/nvmem/imx-ocotp-scu.c
> > > @@ -71,8 +71,8 @@ static int imx_scu_ocotp_read(void *context,
> > > unsigned
> > int offset,
> > >       void *p;
> > >       int i, ret;
> > >
> > > -     index = offset >> 2;
> > > -     num_bytes = round_up((offset % 4) + bytes, 4);
> > > +     index = offset;
> > > +     num_bytes = round_up(bytes, 4);
> > >       count = num_bytes >> 2;
> > >
> > >       if (count > (priv->data->nregs - index)) @@ -100,7 +100,7 @@
> > > static int imx_scu_ocotp_read(void *context, unsigned int offset,
> > >               buf++;
> > >       }
> > >
> > > -     memcpy(val, (u8 *)p + offset % 4, bytes);
> > > +     memcpy(val, (u8 *)p, bytes);
> > >
> > >       kfree(p);
> > >
> > With these changes you could use the 'val' pointer directly as the
> > destination for ocotp_read() without need for an intermediate buffer.
> >
> >
> > Lothar WaÃmann
> 
> You are right, in fact, we can remove "p" and "buf" pointer.
> Thanks for your review, I will send out the V2.

Hi Lothar,

It still need intermediate buffer to read out n words (n * 4 bytes) from eFuse.
Because 'val' buffer size is real count parsed from DT, which is not an integer multiple of 4.

For example, cell->bytes is parsed from "reg" property and it is real count like 6.
                        fec_mac0: mac@2c4 {
                                reg = <0x2c4 6>;
                        }; 

So we have to use intermediate buffer here.