[PATCH 08/10] net: hisilicon: Offset buf address to adapt HI13X1_GMAC
From: Jiangfeng Xiao
Date: Fri Jul 05 2019 - 02:12:35 EST
The buf unit size of HI13X1_GMAC is cache_line_size,
which is 64, so the address we write to the buf register
needs to be shifted right by 6 bits.
The 31st bit of the PPE_CFG_CPU_ADD_ADDR register
of HI13X1_GMAC indicates whether to release the buffer
of the message, and the low indicates that it is valid.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@xxxxxxxxxx>
---
drivers/net/ethernet/hisilicon/hip04_eth.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index 5328219..c578934 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -120,12 +120,20 @@
#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(0)
#define PPE_CFG_QOS_VMID_MODE BIT(15)
#define PPE_CFG_BUS_LOCAL_REL (BIT(9) | BIT(15) | BIT(19) | BIT(23))
+
+/* buf unit size is cache_line_size, which is 64, so the shift is 6 */
+#define PPE_BUF_SIZE_SHIFT 6
+#define PPE_TX_BUF_HOLD BIT(31)
#else
#define PPE_CFG_QOS_VMID_GRP_SHIFT 8
#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 11
#define PPE_CFG_STS_RX_PKT_CNT_RC BIT(12)
#define PPE_CFG_QOS_VMID_MODE BIT(14)
#define PPE_CFG_BUS_LOCAL_REL BIT(14)
+
+/* buf unit size is 1, so the shift is 6 */
+#define PPE_BUF_SIZE_SHIFT 0
+#define PPE_TX_BUF_HOLD 0
#endif /* CONFIG_HI13X1_GMAC */
#define PPE_CFG_RX_FIFO_FSFU BIT(11)
@@ -286,7 +294,7 @@ static void hip04_config_fifo(struct hip04_priv *priv)
val |= PPE_CFG_QOS_VMID_MODE;
writel_relaxed(val, priv->base + PPE_CFG_QOS_VMID_GEN);
- val = RX_BUF_SIZE;
+ val = RX_BUF_SIZE >> PPE_BUF_SIZE_SHIFT;
regmap_write(priv->map, priv->port * 4 + PPE_CFG_RX_BUF_SIZE, val);
val = RX_DESC_NUM << PPE_CFG_RX_DEPTH_SHIFT;
@@ -369,12 +377,18 @@ static void hip04_mac_disable(struct net_device *ndev)
static void hip04_set_xmit_desc(struct hip04_priv *priv, dma_addr_t phys)
{
- writel(phys, priv->base + PPE_CFG_CPU_ADD_ADDR);
+ u32 val;
+
+ val = phys >> PPE_BUF_SIZE_SHIFT | PPE_TX_BUF_HOLD;
+ writel(val, priv->base + PPE_CFG_CPU_ADD_ADDR);
}
static void hip04_set_recv_desc(struct hip04_priv *priv, dma_addr_t phys)
{
- regmap_write(priv->map, priv->port * 4 + PPE_CFG_RX_ADDR, phys);
+ u32 val;
+
+ val = phys >> PPE_BUF_SIZE_SHIFT;
+ regmap_write(priv->map, priv->port * 4 + PPE_CFG_RX_ADDR, val);
}
static u32 hip04_recv_cnt(struct hip04_priv *priv)
--
1.8.5.6