[PATCH 0/5] Add Bitmain BM1880 clock driver

[Manivannan Sadhasivam]

Hello,

This patchset adds common clock driver for Bitmain BM1880 SoC clock
controller. The clock controller consists of gate, divider, mux
and pll clocks with different compositions. Hence, the driver uses
composite clock structure in place where multiple clocking units are
combined together.

This patchset also removes UART fixed clock and sources clocks from clock
controller for Sophon Edge board where the driver has been validated.

Thanks,
Mani

Manivannan Sadhasivam (5):
  dt-bindings: clock: Add Bitmain BM1880 SoC clock controller binding
  arm64: dts: bitmain: Add clock controller support for BM1880 SoC
  arm64: dts: bitmain: Source common clock for UART controllers
  clk: Add driver for Bitmain BM1880 SoC clock controller
  MAINTAINERS: Add entry for Bitmain BM1880 SoC clock driver

 .../bindings/clock/bitmain,bm1880-clk.txt     |  47 +
 MAINTAINERS                                   |   2 +
 .../boot/dts/bitmain/bm1880-sophon-edge.dts   |   9 -
 arch/arm64/boot/dts/bitmain/bm1880.dtsi       |  27 +
 drivers/clk/Kconfig                           |   6 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-bm1880.c                      | 947 ++++++++++++++++++
 include/dt-bindings/clock/bm1880-clock.h      |  82 ++
 8 files changed, 1112 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt
 create mode 100644 drivers/clk/clk-bm1880.c
 create mode 100644 include/dt-bindings/clock/bm1880-clock.h

-- 
2.17.1