Re: [PATCH v2 1/4] dt-bindings: phy: add binding for the Lantiq VRX200 and ARX300 PCIe PHYs

[Rob Herring]

On Thu, Jul 4, 2019 at 6:23 AM Martin Blumenstingl
<martin.blumenstingl@xxxxxxxxxxxxxx> wrote:
>
> Add the bindings for the PCIe PHY on Lantiq VRX200 and ARX300 SoCs.
> The IP block contains settings for the PHY and a PLL.
> The PLL mode is configurable through a dedicated #phy-cell in .dts.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> ---
>  .../bindings/phy/lantiq,vrx200-pcie-phy.yaml  | 95 +++++++++++++++++++
>  .../dt-bindings/phy/phy-lantiq-vrx200-pcie.h  | 11 +++
>  2 files changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
>  create mode 100644 include/dt-bindings/phy/phy-lantiq-vrx200-pcie.h

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>