[PATCH v3 09/13] dt-bindings: display: Convert panel-lvds to DT schema
From: Rob Herring
Date: Fri Jul 05 2019 - 12:42:44 EST
Convert the panel-lvds binding to use DT schema. The panel-lvds schema
inherits from the panel-common.yaml schema and specific LVDS panel
bindings should inherit from this schema.
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Reviewed-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/display/panel/lvds.yaml | 107 ++++++++++++++++
.../bindings/display/panel/panel-lvds.txt | 121 ------------------
2 files changed, 107 insertions(+), 121 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/lvds.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-lvds.txt
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
new file mode 100644
index 000000000000..d0083301acbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Display Panel
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
+ - Thierry Reding <thierry.reding@xxxxxxxxx>
+
+description: |+
+ LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+ incompatible data link layers have been used over time to transmit image data
+ to LVDS panels. This bindings supports display panels compatible with the
+ following specifications.
+
+ [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+ 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+ [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+ Semiconductor
+ [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+ Electronics Standards Association (VESA)
+
+ Device compatible with those specifications have been marketed under the
+ FPD-Link and FlatLink brands.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ contains:
+ const: panel-lvds
+ description:
+ Shall contain "panel-lvds" in addition to a mandatory panel-specific
+ compatible string defined in individual panel bindings. The "panel-lvds"
+ value shall never be used on its own.
+
+ data-mapping:
+ enum:
+ - jeida-18
+ - jeida-24
+ - vesa-24
+ description: |
+ The color signals mapping order.
+
+ LVDS data mappings are defined as follows.
+
+ - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
+ [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
+
+ Slot 0 1 2 3 4 5 6
+ ________________ _________________
+ Clock \_______________________/
+ ______ ______ ______ ______ ______ ______ ______
+ DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+ DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+ DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+
+ - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
+ specifications. Data are transferred as follows on 4 LVDS lanes.
+
+ Slot 0 1 2 3 4 5 6
+ ________________ _________________
+ Clock \_______________________/
+ ______ ______ ______ ______ ______ ______ ______
+ DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
+ DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
+ DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
+ DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
+
+ - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
+ Data are transferred as follows on 4 LVDS lanes.
+
+ Slot 0 1 2 3 4 5 6
+ ________________ _________________
+ Clock \_______________________/
+ ______ ______ ______ ______ ______ ______ ______
+ DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+ DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+ DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+ DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
+
+ Control signals are mapped as follows.
+
+ CTL0: HSync
+ CTL1: VSync
+ CTL2: Data Enable
+ CTL3: 0
+
+ data-mirror:
+ type: boolean
+ description:
+ If set, reverse the bit order described in the data mappings below on all
+ data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+
+required:
+ - compatible
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
deleted file mode 100644
index 250850a2150b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-LVDS Display Panel
-==================
-
-LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
-incompatible data link layers have been used over time to transmit image data
-to LVDS panels. This bindings supports display panels compatible with the
-following specifications.
-
-[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
-1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
-[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
-Semiconductor
-[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
-Electronics Standards Association (VESA)
-
-Device compatible with those specifications have been marketed under the
-FPD-Link and FlatLink brands.
-
-
-Required properties:
-
-- compatible: Shall contain "panel-lvds" in addition to a mandatory
- panel-specific compatible string defined in individual panel bindings. The
- "panel-lvds" value shall never be used on its own.
-- width-mm: See panel-common.txt.
-- height-mm: See panel-common.txt.
-- data-mapping: The color signals mapping order, "jeida-18", "jeida-24"
- or "vesa-24".
-
-Optional properties:
-
-- label: See panel-common.txt.
-- gpios: See panel-common.txt.
-- backlight: See panel-common.txt.
-- power-supply: See panel-common.txt.
-- data-mirror: If set, reverse the bit order described in the data mappings
- below on all data lanes, transmitting bits for slots 6 to 0 instead of
- 0 to 6.
-
-Required nodes:
-
-- panel-timing: See panel-common.txt.
-- ports: See panel-common.txt. These bindings require a single port subnode
- corresponding to the panel LVDS input.
-
-
-LVDS data mappings are defined as follows.
-
-- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
- [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
-
-Slot 0 1 2 3 4 5 6
- ________________ _________________
-Clock \_______________________/
- ______ ______ ______ ______ ______ ______ ______
-DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-
-- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
- specifications. Data are transferred as follows on 4 LVDS lanes.
-
-Slot 0 1 2 3 4 5 6
- ________________ _________________
-Clock \_______________________/
- ______ ______ ______ ______ ______ ______ ______
-DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
-DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
-DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
-DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
-
-- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
- Data are transferred as follows on 4 LVDS lanes.
-
-Slot 0 1 2 3 4 5 6
- ________________ _________________
-Clock \_______________________/
- ______ ______ ______ ______ ______ ______ ______
-DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
-
-Control signals are mapped as follows.
-
-CTL0: HSync
-CTL1: VSync
-CTL2: Data Enable
-CTL3: 0
-
-
-Example
--------
-
-panel {
- compatible = "mitsubishi,aa121td01", "panel-lvds";
-
- width-mm = <261>;
- height-mm = <163>;
-
- data-mapping = "jeida-24";
-
- panel-timing {
- /* 1280x800 @60Hz */
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hsync-len = <70>;
- hfront-porch = <20>;
- hback-porch = <70>;
- vsync-len = <5>;
- vfront-porch = <3>;
- vback-porch = <15>;
- };
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&lvds_encoder>;
- };
- };
-};
--
2.20.1